您要查找的是不是:
- A DS1 remove operation may affect any related signaling link connections (such as a remote login session) that is carried by this DS1. 使 DS1 退出服務的操作會影響到該 DS1 上承載的任意相關信令鏈路連接(比如遠程登錄會話)。
- This layer defines the physical,electrical,and functional characteristics of the signaling links connecting SS7 components. 這一層定義了連接 SS7 組件的信令鏈路的物理的、電氣的和功能性特徵。
- This layer defines the physical, electrical, and functional characteristics of the signaling links connecting SS7 components. 這一層定義了連接 SS7 組件的信令鏈路的物理的、電氣的和功能性特徵。
- An e-mail sent on a regular basis would link connection between both sides. 另外,傳統營銷中,運用大眾傳媒大規模促銷活動,容易引起競爭者的對抗行為,削弱促銷的效果。
- Each Data Link Connection Identifier (DLCI) supported by the interface is reported as active or inactive. 介面支持的每個數據鏈路連接識別符(DLCI)是按現行的或者非現行的方式報告出來。
- Cracking was initially detected in the east truss at the pin link connection in member L15-L16. 裂紋首先發現於東側桁架的L15-L16桿件的樞軸鏈桿連接處。
- Signaling Link Code = the member number within a link set. Signaling Link Code = 鏈路群內的成員號。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 鏈路群內的成員號。
- Signal unit initial alignment - invokes initial alignment prior to activating or restoring a signaling link. 信令單元初始定位 -- 在激活或恢複信令鏈路之前調用初始定位。
- DLCI Data Link Connection Identifier ( DLCI) is a unique number assigned to a Permanent Virtual Circuit (PVC) end point in a frame relay network. 本策略的目的使為了定義任何外部主機連接到企業網路的標準。這些標準是為了使非授權使用企業資源造成的損害及相應的企業信息暴露最小化。
- The CHG:SLK command is used to change the minor state of a signaling link. CHG:SLK 命令用於更改信令鏈路的次級狀態。
- Major State of Link = the major equipage status of the signaling link. Major State of Link = 該信令鏈路的主要設備狀態。
- Signal link performance monitoring - monitors link performance and removes links not meeting performance requirements (64 errors). 信令鏈路性能監視 -- 監視鏈路性能並刪除不符合性能要求(64 個錯誤)的鏈路。
- Signaling links are usually equipped in pairs in SS7 networks. 信令鏈路常常是成對地裝配在 SS7 網路中。
- The device routes or switches incoming messages to an outgoing signaling link using routing information within the multitiered SS7 message. 該裝置為利用多層七號信令報文中的路由信息,為進來的報文送到輸出的信令鏈路上建立路由或進行交換。
- This state Indicates that the AP-DS1 is available for use by an RCS signaling link. 該狀態表明 AP-DS1 可供 RCS 信令鏈路使用。
- Link Node Address (Group and Member) = the node within the IMS ring on which the signaling link terminates. 鏈路節點地址 (Group and Member) = IMS 環路內信令鏈路終止的節點。
- DLCI Data link connection identifier 數據鏈路連接標識符
- A red light is usually a signal of danger. 紅燈通常是危險的信號。
- The s7ln form (SS7 link) is used to define the individual SS7 signaling links. s7ln 表(SS7 鏈路)是用於定義各 SS7 信令鏈路。