您要查找的是不是：
- A continuous self check ensures high safety. 持續的自檢確保了高安全性。
- Do exercises in Self check Ex.1. 練習1是對單詞和短語的檢測。
- Turn test kit on, wait until self check is complete. 打開檢測組件,等到自測完成為止。
- First check module, Check module O-ring and Disc elastomer. 第一止回閥模塊,止回閥模塊O形環和閥瓣合成橡膠。
- Second check module, Check module O-ring and Disc elastomer. 第二止回閥模塊,止回閥模塊O形環和閥瓣合成橡膠。
- At the hospital, the FBI agents interrogating Self check his files and see that Mahone's involved. 在醫院，審問賽爾夫的聯邦調查局的特工仔細看著文件，發現馬宏是其中一個參與者。
- Remove first check module from module adaptor, and repeat above procedure with second check module. 從模塊適配器上拆卸第一止回閥模塊，對於第二止回閥模塊重複上列步驟。
- Wash check module and O-ring and inspect for any damage. If damaged, reinstall new parts. 沖洗止回模塊和O形環,檢查是否損壞。如果已經損壞,則重新安裝新的部件。
- Check module construction shall include built-in limit stops to prevent disc wear due to backpressure. 止回閥模塊結構應該包括內置止動限止器，防止由於反壓力造成閥瓣磨損。
- The computer start up with me sometimes putting up one big string English time self check up being engaged in such that will suffer from neurasthenia soon! 電腦有時開機自檢時出一大串英文把我搞得都快神經衰弱了！
- The heavier spring and smaller diameter seat belong with the first check module. 較重的彈簧和較小直徑的閥座屬於第一止回閥模塊。
- Remove first check module from valve body and insert complete with O-ring in plug module adaptor. 從閥體上拆卸第一止回閥模塊，將其以及O形環插入塞子模塊適配器。
- To clean or inspect either check module, insert a#3 screwdriver through the downstream side of the check module as shown in Figure D and E. 要清洗或檢查每個止回閥模塊，如圖D和E所示，則要通過止回閥模塊的下游一側插入一把3號螺絲刀。
- The check assemblies are threaded into the valve body. To remove the first check assembly, rotate the check module by hand counterclockwise. 止回閥總成是螺紋旋進閥體的。為了拆卸第一止回閥總成，用手逆時針方向旋轉止回閥模塊。
- Ring of Stabilization : This crystalline ring continually grants the wearer a +10 competence bonus on Stabilize Self checks. 穩定戒指：該水晶戒指持續提供佩戴者「自我穩定」檢定+10能力加值。
- The check assemblies are threaded into the body. To remove the first check assembly, rotate the check module by hand counterclockwise. 這種止回閥總成是通過螺紋旋進閥體的。為了拆卸第一止回閥總成,要用手逆時針方向旋轉止回閥模塊。
- Remove first check module from valve body and insert complete with O-ring in plug module adaptor. Seat firmly with moving portion of check module facing up. 從閥體上拆卸第一止回閥模塊，將其以及O形環插入塞子模塊適配器。將止回模塊的活動部分面朝上牢牢地密封住。
- To clean or inspect either check module, insert a #3 screwdriver through the downstream side of the check module as shown in Figure D and E. 要清洗或檢查每個止回閥模塊，如圖D和E所示，則要通過止回閥模塊的下游一側插入一把3號螺絲刀。
- self checking integrated circuit 自檢集成電路
- The vision check module can generate the total vision envelope plot of pilot in rectilinear coordinates according to American Military Standard. 視界檢查模塊可以按照美國軍用標準生成飛行員的總視界包絡圖。
