您要查找的是不是：
- Salt Bath Started by Salt Slag Re. 鹽渣電阻啟動電極鹽浴爐。
- Salt Bath Started by Salt Slag Resistor. 鹽渣電阻啟動電極鹽浴爐鹽渣電阻啟動電極鹽浴爐。
- It was investigated that chromizing in borax salt bath and melting hydrochloride. 研究了硼砂鹽浴滲鉻和氯系熔鹽滲鉻。
- The structure of electrode neutral salt bath titanized layer of T12 steel has been studied by means of microscope, EPMA,X-ray diffractometer and TEM. 用光學顯徽鏡、電子探針、X射線衍射儀和透時電鏡研究了T12鋼電極中性鹽浴滲鈦層的組織結構。
- The result shows that the porosity of nitrided layer is due to the over concentration of CNO- in the salt bath. 試驗結果表明，滲層疏鬆主要是由於鹽浴內CNO－濃度過高所致；
- Protecting effect of SQA coating was compared with that of commercial paints or salt bath treatment. 用SQA型塗料和商品塗料進行加熱保護及用鹽浴處理,對保護效果進行了比較,結果表明SQA型是一種較為理想的高、中溫防氧化脫碳塗料。
- The carbon steel used in the mixed salt bath which is the mixture of broax and neutral salt for vanadinizing. 採用硼砂與中性鹽混合鹽浴對碳鋼試樣進行滲釩,研究鋼含碳量及保溫時間對覆層厚度的影響。
- If one takes a salt bath and requires salt, salt will be absorbed through the pores into the crystalline form. 如果你做了一次鹽浴且身體正需要鹽，那麼鹽就將透過毛孔而被吸入到水晶形體中。
- Immediate quenching and tempering process of steel T10 after low temperature salt bath chromizing was studied. 研究了 T10鋼在低溫鹽浴滲鉻后直接淬火併回火工藝。
- The austempering in salt bath can increase the impact toughness and wear resistance of the high alloy white cast iron. 鹽浴等溫淬火可提高高合金白口鑄鐵的衝擊韌性及耐磨損性能。
- Effect of the Ti catalysis on the nitrocarburizing of Cr12 steel in salt bath at a low temperature was investigated. 闡述了鈦催滲低溫鹽浴氮碳共滲機理,重點研究了鈦催滲對幾種不同材料鋼氮碳共滲的影響。
- The salt bath nitrocarburizing techonlogy of WD615 diesel engine crankshaft was studied. 研究了WD615柴油機曲軸鹽浴氮碳共滲工藝。
- This paper deals with the non-toxic nitrocarburizing of the valve in salt bath at lowtemperature. 通過氣門低溫無毒鹽浴氮碳共滲試驗，提出了一種新的金屬化學熱處理工藝。
- The basic principle and specific process of eutectic melting boriding in salt bath are investigated initially in this paper. 對鹽溶共晶化滲硼的基本原理和具體工藝進行了探討。
- Deactivation and reactivation of salt baths are studied. 摘要研究了鹽浴的失活與復活。
- This paper mainly describes the feasibility experiment, design and main functionof the two-hundred kilowatt power salt bath furnace. 本文主要描述了對200千瓦鹽浴鋁釺焊鹽浴爐的方案試驗、設計及主要使用性能。
- This paper introduces the process of coated vanadium carbide with powder method in place of coated metal vanadium carbide with salt bath treatment. 介紹了用粉末法被覆碳化鈮工藝代替鹽浴被覆金屬碳化鈮工藝，並給出實驗結果。
- Metals readily corrodible in fused salt, such as titanium, can be heat treated in fused salt bath under cathodic protection. 在熔鹽中容易腐蝕的金屬,例如鈦,可以在熔鹽中用陰極保護而進行熱處理。
- The results showed that a chromized layer with good wear resistance could be gained in steel 45 by low temperature salt bath chromizing. 研究了45鋼低溫鹽浴滲鉻工藝,分析了滲鉻層的金相組織和相結構,測量了滲層厚度、滲層硬度及鉻濃度分佈,並進行了滲鉻層的耐磨試驗。
- Abstract： The microstructure of carburized layer in 20 steel cast-iron molten bath carburized at different temperature and time was studied in the paper. 摘 要： 本文探討了20鋼在鑄鐵浴中經不同溫度及時間滲碳的滲層組織。
