您要查找的是不是:
- An equation for the calculation of true shear strain was derived from the integration of infinitesimal shear strain in plane shearing process with constant principal shear strain direction. 對切應變主軸不變的平面簡單切變過程,通過無窮小應變的積分,導出了真實切應變計算公式。
- maximum principal shear strain 最大主剪應變
- The shear strain can be determined in the following way. 用下列方法能夠確定切應變。
- Shear strain in MBE grown CdTe films on Si(211) substrates[J]. 引用該論文 王元樟;陳路;巫艷;吳俊;於梅芳;方維政;何力.
- The transformation is due to the shear strain imposed on the specimen by ECAP. 該轉變發生是由於ECAP過程中材料承受剪切應變,應變能累積誘發再結晶,從而形成等軸晶雙相結構。
- The only strain is a shear strain and the dilatation is zero, these waves are called shear waves. 唯一的應變是剪應變而沒有膨脹,這種波叫剪切波。
- Good bonds are always accompanied by surface extension, that is, plastic shear strain. 良好的鍵合總伴有表面延伸即塑性切向形變。
- Variation of Damping Properties Under Magnetic Field and Shear Strain Amplitude in Fe-Cr-Al Alloys. 高阻尼Fe-Cr-Al合金在磁場和應力場下的阻尼行為
- The elasticity of copolyester increases with the shear strain but decreases with the temperature. 彈性隨切應力的增大而增大,隨溫度的升高而降低。
- The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress. 殘餘應變是由於周期剪切引起孔隙壓力增長;在初始剪力作用下產生的附加的剪應變.
- The results show that the data of shear strain 2 are reliable because the component 2 and 4 of shear strainmeter work normally. 通過對標定係數和滯后時間的分析認為:元件2、4工作狀況比較穩定,觀測值差應變2是比較可靠的;
- Moreover, high value region of maximum shear strain and superficial expansion in this area is in Tianjing, Beijing, Tangshan area. 區內最大剪應變、面膨脹的高值區在天津、北京、唐山一帶。
- Showed that by a special choice of initial axes, the mathematical impact of shear strain rate is removed, and only dialation and rigid rotation remain. 藉由選擇特殊的起始軸,顯示當去掉剪切應變速率,僅保留扭曲和剛性旋轉的數學上的影響。
- stress couples acting on the principal shear planes 主剪面應力對
- Non-uniform shear dilatancy of rock specimen due to plastic shear strain localization is analyzed considering strain gradient effect. 摘要採用梯度塑性理論,對岩樣剪應變局部化引起的擴容進行了理論分析。
- Furthermore,a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion. 在此基礎上,進一步提出了一種用於預測角焊縫角變形的線彈性簡化方法,即剪切固有應變法。
- Derived results are able to reflect the influence of the quality of a material to them,compared with the result from the shear strain energy strength theory. 導出的結果與由剪切應變能強度理論得來的結果相比,能夠反映材質的不同對疲勞極限條件的影響。
- Objective. To investigate intradiscal pressure, shear strain between anulus and adjacent endplates, and fiber strain in the anulus under pure and combined moments. 目標:調查在環與相鄰終板之間的盤內壓和切應力,以及單純和聯合運動時的纖維強度。
- A constitutive model of unsaturated intact loess was obtained by the generalizing shear stress dividing by the structural parameter increasing monotonously with shear strain. 試驗揭示了濕陷性黃土具有剪縮剪脹性,表明應力比與剪縮剪脹應變比之間具有良好的線性關係;
- Objectie. To inestigate intradiscal pressure, shear strain between anulus and adjacent endplates, and fiber strain in the anulus under pure and combined moments. 目標:調查在環與相鄰終板之間的盤內壓和切應力,以及單純和聯合運動時的纖維強度。