您要查找的是不是:
- Changshu Jiangnan glass fibre Co., Ltd. 常熟江南玻璃纖維有限公司。
- In dynamic ion exchange,the IEC ofthe hollow fibre membrane increases as temperature rises. 在動態離子交換過程中,膜的交換能力隨溫度升高而增加。
- As a result of these experiments, some useful ideas on choosing the conditions for PEU-PES hollow fibre membrane preparation and spinning technology were suggested. 這些工作為PEU-PES中空纖維膜紡絲液的配製和紡絲工藝的選擇奠定了基礎。
- Through selecting proper polymer blend system, the PVDF hollow fibre membrane with high performance, high porosity, hydrophilic surface could be prepared. 通過選擇合適的共混體系,可製備出高性能、高孔隙率、表面親水的聚偏氟乙烯中空纖維膜。
- Unfinished glass fibres become surrounded by water. 未處理的玻璃纖維被水包圍。
- Made of glass fibre, the capsule will float on the sea and will not be dragged down by the sinking ship. 救生艇是玻璃鋼板製成的,它將漂浮在海上,不會被沉船拖下去。
- Golf club manufacturers began using aluminium and glass fibre with limited success. 球杆製造商開始嘗試使用鋁和玻璃材質製作高爾夫球杆,但僅有極少數成功。
- An injection moulded snap-type cage of glass fibre reinforced polyamide 6,6, ball centred, designation suffix TN9. 注模卡式玻璃纖維增強尼龍66保持架,滾動體引導,型號後綴TN9。
- To evaluate whether EPSON 1640 scan and the QS2000 software of HELENA company can be applicable for analyzing electrophoresis of the transparent acetate fibre membrane by manual work. 評估愛普生1640掃描儀和HELENA公司的QS2000軟體是否適用於手工血清蛋白醋酸纖維膜電泳圖譜的分析。
- Housings of series FYK 5 and FYTBK 5 are injection moulded from a glass fibre reinforced polyamide 6 material. FYK 5和FYTBK 5系列軸承座是用玻璃纖維加強聚醯胺材料通過注塑工藝製成。
- The shell or backing is made of wound high-strength tensioned glass fibre also in an epoxy resin matrix. 殼體或背襯採用也採用經纏繞張緊的高強度環氧樹脂基玻璃纖維製成。
- The balls are retained in an injection moulded snap-type cage of glass fibre reinforced polyamide 6,6 (fig 6). 球被保持在注射成型的玻璃纖維增強聚醯胺6,6卡式保持架里(圖6)。
- Effect of the glass fibre on the mlcrostructure and property of.the resin emery grinding wheel is studied. 本文研究了玻璃纖維對薄片樹脂磨具的組織和性能的影響。
- The strengths reported are usually on "virgin" glass fibres. 通常報道的強度是「新生」玻璃纖維的強度。
- The strength of glass fibres presents a more complex picture. 玻璃纖維的強度情況很複雜。
- carboxylic acid type cation exchange fibre membrane 羧酸型陽離子交換纖維膜
- Description Unicoloured, needle-punched, 100% synthetic sports surface, with coated backing and PVC pad, stabilised with glass fibre mesh. 顏色均一、針孔狀100%25合成運動表面,有PVC襯墊背層,玻璃纖維網維持尺寸穩定性。
- And the pulses would travel over glass fibres, not copper wire. 並且脈衝能夠通過玻璃纖維承載,不是銅絲。
- For bearings an injection moulded snaptype cage of glass fibre reinforced polyamide 6,6 (d), please check availability prior to ordering. 裝有注模玻璃纖維增強尼龍6,6卡式保持架(d)的軸承,在訂貨前應先查詢供貨情況。
- The sliding layer of glass fibre reinforced plastic containing PTFE is injection moulded in situ inside the housing washer. 含PTFE玻璃纖維增強塑料的滑動層是在軸承座圈內注射成型。