您要查找的是不是：
- Signaling Link Code = the member number within a link set. Signaling Link Code = 鏈路群內的成員號。
- The alternate link set must not be equal to the preferred link set. 交替鏈路群的值一定不能與首選鏈路群相等。
- A combined link set provides alternate paths between two SS7 nodes. 合併的鏈路群提供兩 SS7 節點之間的交替路徑。
- This value must be different from the other two link set values. 該值必須和其他兩個鏈路群的值不同。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 鏈路群內的成員號。
- Link Set = the link set to which this specific link belongs. Link Set = 該特定鏈路屬於的那個鏈路群。
- A link set may consist of up to 16 links. 一個鏈路群可能由 16 條鏈路組成。
- Change the electric circuit of transducer generally from commutate, the middle direct current link, go against to change and control 4 part constitute. 變頻器的電路一般由整流、中間直流環節、逆變和控制4個部分組成。
- Preferred Link Set-the preferred link set is specified in this field. Preferred Link Set -- 在該欄位指定首選的鏈路群。
- All 16 links can be assigned the same link set number. 全部16 條鏈路會分配到同一個鏈路群號碼。
- Use value added tax can reduce the duty that duty of business tax, product exists to suffer cobbly abuse, same product does not get production and current link the influence of how many, .. 使用增值稅可以減少營業稅、產品稅存在的稅負不平的弊端，同一產品不受生產和流通環節多少的影響，...
- Link Set--this is a number identifying the link set to which this particular link belongs. Link Set -- 這是識別該特定鏈路所屬鏈路群的一個號碼。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set,this field must be set to 0. 對於沒有組合鏈路群的 STP 應用程序(比如 5ESS DCS)，必須將這個欄位設置為 0。
- This value must be unique within a link set and must agree with information in the far end STP or 5ESS DCS. 在鏈路群中，該值必須是唯一的，而且必須與遠端 STP 或 5ESS DCS 上的信息一致。
- The ISI helped found Lashkar-e-Taiba two decades ago, though its current links to the group, which has been officially banned, were not clear. 三軍情報局幫助發現虔誠軍二十年前，但其目前的聯繫，該組織已正式禁止使用，並不清楚。
- Link Set-this is a number identifying the link set to which this particular link belongs. Link Set -- 這是識別該特定鏈路所屬鏈路群的一個號碼。
- Alternate Link Set-the alternate link set to be used in routing flag (DLS_RTG) case. Alternate Link Set -- 交替鏈路群設置為用於路由標誌為 (DLS_RTG) 的情況下。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set, this field must be set to 0. 對於沒有組合鏈路群的 STP 應用程序（比如 5ESS dcs），必須將這個欄位設置為 0。
- Alternate Link Set 裈he alternate link set to be used in routing flag (DLS_RTG) case. 交替鏈路群設置為用於路由標誌為(DLS_RTG)的情況下。
- When a process terminates it sends an exit signal, either normal or non-normal, to the processes in its link set. 當一個進程終止的時候，它發出一個退出信號（不論是否正常退出）到和它鏈接在一起的所有進程。
