您要查找的是不是:
- Cast steel valve installation at an oil refinery. 安裝在煉油廠的鑄鋼閥門。
- Kai Xuan-check Cast Steel Valve in the fully open state, almost unimpeded fluid pressure, the pressure drop through the valve relatively small. 旋啟式止回閥在完全打開的狀況下,流體壓力幾乎不受阻礙,因此通過閥門的壓力降相對較小。
- Resists high temperature fluctuations which damage cast steel valves. 抗高溫波動,這種波動往往會損壞鑄造閥門。
- Frequent temperature fluctuations expose the valve to excessive stresses which cause surface cracks in the body bores of cast steel valves. 頻繁的溫度波動使閥門承受著過度的壓力,這種壓力容易造成鑄鋼閥門閥體孔內部表面裂縫。
- As a marine valve manufacturer,we specialize in producing JIS Standard marine valves including bronze valve,cast steel valve and cast iron valve. 我廠是生產船用閥門的專業廠,長期來主要生產JIS標準船用閥門,產品有青銅閥門、鑄鋼閥門、鑄鐵閥門。
- The most common applications in valves are, for stem material in butterfly valves, and backseat bushings and wedges in cast steel valves. 在閥門上的主要用途是,蝶閥的閥桿,鑄鋼閥門的後座襯套及楔形閘板。
- Table of Content of Crane Cast Steel Valves 美國克雷恩鑄鋼閥門目錄
- The robot can cast steel after being reprogrammed. 在重新設定程序之後,機器人能澆鑄鋼材。
- cast steel valve 鑄鋼閥門
- Stellite takes a high polish and is used in steel valve seat rings. 鎢鉻鈷合金具有很高的拋光度,用作鋼閥門的閥座環。
- The cast steel cools after passing through several water walls. 鑄鋼反覆經過水冷壁之後,冷卻下來。
- Adopt two cast steel rods,which connect the down cutter part. 採用兩個鑄鋼連桿,連接下節切刀部件。
- An all stainless steel valve offers better corrison resistance than cast iron lined valves. The total cost of ownership becomes more attractive than the initial savings. 與鑄鐵系列閥門相比,全不鏽鋼閥門具有更高的耐腐蝕性。用戶的全過程成本的降低變得比初始購置成本的節省更加有吸引力。
- "NIBCO Ductile Iron Valves are an excellent, readily available alternative for cast steel valves." 美國尼伯科公司的球墨鑄鐵閥門是優秀的產品, 確實是鑄鋼閥門有價值的替代品。
- "So ductile iron valves are appropriate for those services where cast steel valves are used, as long as temperatures and pressures do not exceed the limits recommended by aPI." 所以採用鑄鋼閥門的地方也同樣適合採用球墨鑄鐵閥門,在api(美國石油協會)建議的溫度和壓力極限內,球墨鑄鐵的使用壽命並不比鑄鋼短。
- These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials. 這些是適用於高溫應用環境的奧氏體不鏽鋼閥門的螺栓材料。
- Casting steel products are used for main flnges on boom and arm. 后臂和前臂上的主要凸緣都使用鑄鋼製品。
- Neway target is to become one of the world's leading industrial steel valve manufacturers based on China. 紐威的目標是成為源自中國的,世界級的閥門製造商。
- Pump case are welded castings steel and steel plates. 泵殼是由鑄鋼與鋼板焊接而成的。
- Stellite takes a high polish and is used in steel valve seat rings. Normally applied with transfer plasmar-arc; Stellite hardness is not affected by heat treatment. 鎢鉻鈷合金可以進行高度拋光,可用於鋼閥門的密封環。通常用於傳輸等離子體物質。鎢鉻鈷合金的硬度不會受到熱處理的影響。