您要查找的是不是：
- 表面粗糙度均方根RMSthe RMS surface roughness
- 採用旋轉塗膜法在摻釹磷酸鹽激光玻璃棒端面塗制防潮膜,膜層固化后透過率達96.5%,獲得的膜層表面粗糙度優良,均方根表面粗糙度(RMS)為1.659 nm,平均粗糙度(RA)平均為1.321 nm;After the sol is coated it on phosphate laser glass by rotating way,moistureproof film is worked out,having a transmittance of 96.5%25 after heated. The film has a good morphology,roughness of mean square RMS of 1.659 nm and roughness of average RA of 1.321 nm.
- 微晶硅薄膜的表面粗糙度及其生長機制的X射線掠角反射研究Studies on surface roughness and growth mechanisms of microcrystalline silicon films by grazing incidence X-ray reflectivity
- 論文採用無切換的電感耦合等離子體刻蝕(ICP)技術在SOI材料上刻蝕出垂直度好於89°、均方根表面粗糙度小於10nm的刻蝕側壁。In this thesis, etched walls with verticality of better than 89? and Root-mean-Square (RMS) surface roughness of below 10 nm are achieved by using non-switched Inductivity Coupled Plasma (ICP) etching technique.
- 導紗桿表面粗糙度的作用超過纖維表面的粗糙度。The contribution of the guide surface roughness overshadows that of the fiber surface roughness.
- 利用該儀器對K9基底上的銀(Ag)膜和氧化鋯(ZrO2)薄膜進行了測量,並根據標量散射理論得到了表面均方根(RMS)粗糙度。Silver(Ag) layers and zirconia(ZrO_2) films deposited on K9 glasses are measured by this instrument,then using the scalar scattering method,the root mean square(RMS) roughness of these films are calculated.
- 複雜曲面五坐標數控銑削表面粗糙度預測的關鍵技術研究Study on Key Technology of Surface Roughness Prediction of Sculptured Surface by Five-Axis NC Milling
- 用總的集成散射法測量光學部件有效表面粗糙度的試驗方法Test Method for Measuring the Effective Surface Roughness of Optical Components by Total Integrated Scattering
- 表面粗糙度,Surface roughness
- 紡紗膠輥表面粗糙度初探Our Views on the Surface Roughness of Spinning Cots
- 表面粗糙度RaSurface Roughness
- 原子力顯微鏡(AFM)結果表明薄膜表面非常平整,無空洞。 對12nm厚的HfO_2而言,其均方根粗糙度為0.16nm。Atomic force microscopy (AFM) images show an extremely smooth surface obtained, with a root-mean-square (rms) roughness of about 0.16 nm for a 12 nm thick HfO_2 film.
- 組合式表面粗糙度比較樣塊933Multi-pattern surface roughness comparison specimens 933
- 內表面粗糙度Interior surface roughness
- 表面粗糙度值surface roughness
- 木材表面粗糙度wood surface roughness
- 表面粗糙度預測prediction of the surface roughness
- 土壤表面粗糙度soil surface roughness
- 表面粗糙度測量surface roughness measurement
- 表面粗糙度參數surface roughness parameter
