您要查找的是不是：
- bevel drive pinion assembly 主锥总成
- bevel drive pinion 主动小锥齿轮
- bevel drive pinion ball bearing 主动小锥齿轮滚珠轴承
- Refer to Drive Pinion Bearing Pre-Load Adjustment. 参阅驱动小齿轮轴承预荷调整。
- Worn teeth on ring gear or drive pinion gear. 环形齿轮或驱动小齿轮上齿磨损。
- End play in drive pinion bearings. 驱动小齿轮轴承的端隙。
- By analyzing the push force to pinion gear bearing, the impact of the push force to bearing on the preload of pinion assembly of truck is confirmed. 介绍了中空装配式凸轮轴的滚花连接机理,采用有限元数值模拟分析了滚花连接压装力的影响因素,并进行了凸轮和轴体的压装试验。
- The drive pinion is beveled at 45 degrees and engages the ring gear, which is also beveled at 45 degrees, causing the ring gear to revolve at 90 degrees to the drive shaft. 该驱动器齿轮是斜45度和参与的齿圈，这也是斜角在45摄氏度，造成齿圈旋转90度的传动轴。
- According to part drawing of spiral bevel driven gear of automotive final drive, the preformed blank and experimental die have been designed and manufactured. 摘要根据汽车后桥从动螺旋伞齿轮的锻件图设计并制造了预制坯和辗压试验模具；
- The ring gear is attached to the differential case so that the ease rotates with the ring gear when the latter is driven by the drive pinion. 冠状齿轮与差速器壳相连,这样当冠状齿轮由传动齿轮驱动转动时,差速器壳也转动。
- An over-running clutch on the drive pinion prevents the starter from being driven by the engine once it starts. 在驱动小齿轮上的一个超转离合器可避免启动马达被引擎带动，一旦引擎启动了。
- In this paper, the metal flow route during closed die extrusion for spiral bevel driving gear of automotive final drive is analyzed and the profile of preformed blank has been designed. 摘要分析了主动螺旋伞齿轮闭塞挤压的金属流动路线，设计了预制坯的形状。
- The driving power enters the differential through the drive pinion on the end of the propeller shaft. The drive pinion is meshed with a large ring gear so that the ring gear revolves with the pinion. 也就是说,驱动力是从传动轴末端的传动齿轮输送到差速器的。传动齿轮与一个很大的冠状齿轮啮合,传动齿轮驱动冠状齿轮。
- The bevel of that picture frame was damaged. 那个镜框的斜角已被损坏了。
- Jack was assigned to the assembly shop of the factory. 杰克被分配到厂里的装配间工作。
- axle drive pinion adjusting sleeve 车轴传动小齿轮调整套
- Analysis of Cracks in Bevel Drive Gear of "EQ-153" Rear Axle “EQ-153”汽车后桥圆锥主动齿轮裂纹分析
- differential drive pinion bearing cage 差速器主动小齿轮轴承罩
- differential drive pinion cage bearing 差速器主小齿轮轴承罩
- Robots are replacing people on assembly lines. 机器人逐渐代替了装配线上的工人。
