您要查找的是不是:
- Gear operated valves shall be equipped with position indicator and high impact polypropylene handwheel. 齿轮操作蝶阀应该配置位置指示器和高强度抗冲击聚丙烯手轮。
- Gleason spiral bevel gear cutter. 格里森螺旋伞齿轮铣刀。
- Available on all sizes of handwheel and bevel gear handwheel operated valves. To order, add a comma and the order code "LK" after the actuator code. 适用于所有采用手轮和锥齿轮手轮操作的阀门。订购时,在执行器订购代码后增加一个逗号和订购代码“LK”。
- Our main products: reducer, gear motor, bevel gear, worm-gear motor, cycloidal reducer and variator. 公司主要产品有:齿轮减速机;蜗轮蜗杆减速机;螺旋伞齿轮减速机;摆线针轮减速机及无级变速器。
- Air wrench operation speeds up cycle time on high gear ratio bevel gears however, the mechanical advantage available from bevel gearing enables the operator to damage the valve. 气动扳手操作加快了高齿轮传动比伞齿轮装置的循环速度,但是,其伞齿轮的机械增益使得操作者可能对阀门造成破坏。
- The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented. 给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。
- Assure both mounting base of gear operator (3) and valve top flange (6) are clean and dry. 确保齿轮操作机构(3)和阀门顶部法兰(6)的安装基座清洁并且干燥。
- The inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application. 推导基于工程应用的直齿圆锥齿轮啮合面的数学模型。
- Gear operator is removed by unscrewing hex head screws which hold operator to valve body. 通过拧松将操作机构固定在阀体上的六角螺栓来拆卸齿轮操作机构。
- Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1. 如果采用正齿轮(SGA)或复合伞齿轮(BGA)附件,则可以在图1中显示的各个位置安装手轮。
- The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out. 该研究是国内首次对螺旋锥齿轮动态力研齿进行的理论分析研究。
- Valve to have weatherproof gear operator rated for indoor/outdoor use with raised position indicator and two internal supervisory switches. 这类阀门应该配置不受气候影响的齿轮执行机构,可用于室内/室外,具有上升位置指示器和两个内置监控开关。
- All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels. 所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。
- Bevel gears: gears which connect two shafts at right angles. 伞齿轮:连接直角相交两轴的齿轮。
- Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible. 揭示了使用复动闭式模锻模具成形小锥角螺旋伞齿轮的可行性。
- Pipeline system:lt adopts the most excellent set in the trade. Main part have BURKERT high-temperature air operated valve and SIEMENS vacuum pump. 管路系统:行业最优化配置,主要部件BURKERT气动阀和西门子真空泵。
- The teeth on bevel gears can be straight, spiral or hypoid. 锥齿轮的齿可以是直齿、螺旋形或准双曲面。
- Priciples of cutting epicycloid bevel gear by continuous indexing method are investigated systematically. 对摆线齿锥齿轮连续分类法铣齿原理进行了系统研究。
- NOTE: Connection of gear operator to valve stem varies depending on gear operator model, size, and style. The adapter bushing and key may be different from illustration shown. 注意:齿轮操作机构与阀门阀杆的连接与齿轮操作机构的型号、大小和类型有关。适配器衬套和销键可能与图示不同。
- When ordering bevel gear actuators, specify mounting position as second line information. 如果是订购锥齿轮执行器,请在第二行增加安装位置信息。