您要查找的是不是：
- Whether these values can be fully exploited depends on the bearing arrangement design and the type of seal used. 至于这些值能否得到充分利用,则取决于轴承的配置设计和使用的密封件种类。
- This method of adjustment is frequently used when the components of a bearing arrangement are pre-assembled. 这种调整方法经常在轴承配置部件预组装的情况下使用。
- This results in an operationally reliable bearing arrangement with long service life. 这样,轴承布局在运转上就很可靠,使用寿命也延长了。
- The use of a good sealing or retaining shield is a prerequisite to prevent grease leaking from the bearing arrangement. 使用好的密封或保持护罩是避免润滑脂由轴承配置漏出的先决条件。
- It is studied the existing three kinds of bearing arrangement for the driving gear shaft of locomotive motor. 摘要研究了现有的3种机车电机主动齿轮轴轴承布置方式。
- The choice of clearance or preload depends on the demands placed on the performance of the bearing arrangement and on the operating conditions. 游隙或预负荷的选择,取决于对轴承布局的性能和运转条件的要求。
- It should also be considered that the total cost of a bearing arrangement and inventory considerations could also influence the final choice. 还必须注意到,整个轴承配置的总成本和库存清单方面的考虑也会影响最后的选择。
- With individual adjustment, each bearing arrangement is adjusted separately using nuts, shims, spacer sleeves, deformable sleeves etc. 采用单独调整时,每个轴承配置使用螺母、垫片、间隔套、变形套等分别调整。
- The SKF TMBU concept combines in one unit all the functions important for the bearing arrangement, also including the insulation, if required. SKF的牵引电动机轴承装置TMBU概念,把所有轴承组合的重要功能结合在一个装置里,如果需要还包括绝缘。
- The housings are designed for bearing arrangement type "Bearing on adapter sleeve and smooth shafts" with 50 to 400 mm diameter. 轴承座是为直径50-400毫米的轴承配置类型“紧定套和光滑轴上的轴承”设计的。
- Temperature differentials and the direction of heat flow in the bearing arrangement must therefore be carefully considered. 因此,必须仔细考虑轴承配置内的温差和热流方向。
- One method is to check the set axial clearance, for example, of a hub bearing arrangement, using a dial gauge attached to the hub (fig). 例如,有一种方法是用装在轮毂上的千分表,检查轮毂轴承布局的设定轴向游隙(图10)。
- Basket & Bear Arrangement:Chrysanthemums,larkspur and sunflowers with a plush bear arrive in a darling wicker basket. 菊花、飞燕草和向日葵的花篮，附一只小熊。
- Bearing arrangements where large numbers have to be mounted. 大量安装的轴承配置。
- Bearing arrangements which are to be subjected to considerable shock loads. 要承受相当大冲击负荷的轴承配置。
- The combination of a CARB bearing and an appropriate bearing housing constitutes an economic, interchangeable and reliable non-locating bearing arrangement, which fulfils the demands for easy maintenance. CARB轴承与合适的轴承座相结合,可组成具有经济性、互换性和可靠性的非定位端轴承布局,能够满足便于维护的需求。
- Bearings having this external flange can be axially located in the housing to provide a simplified, more compact bearing arrangement. 具有这种外圈挡边的轴承可以在轴承座里轴向定位,提供了简单、较紧凑的轴承配置。
- The radial load is divided equally over the two bearings; the axial load is shared according to the bearing arrangement. 两个轴承平分整体的径向负荷;轴向负荷则根据轴承的配置来分担;
- In order to provide low noise and good highspeed operation it is normal to apply an axial preload to a bearing arrangement comprising two hybrid deep groove ball bearings. 为能提供低噪音高速运转性能,通常要对含有两个混合陶瓷深沟球轴承的轴承组合施加一个轴向预负荷。
- Bearing arrangements where the final position of the bearing cannot be accurately prescribed prior to mounting. 在安装之前不能精确设定轴承最后位置的轴承配置。
