您要查找的是不是：
- beam current adjustment 电子束电流调整
- A ns pulse beam device is installed at pulse beam current piping. 在脉冲束流管道上安装有强流毫微秒脉冲化聚束装置。
- If the local time zone observes daylight saving time, ToLocalTime applies the current adjustment rule to time when performing the conversion. 如果本地时区遵守夏时制,则执行转换时,ToLocalTime会将当前调整规则应用于time。
- In display technique, excessive luminosity of the spot due to excessive beam current. 在显示技术中，指由于电子束电流太大而产生的光点太亮的现象。参阅beam，spot。
- The DC into AC current adjustable frequency that the inverter on. 将直流变为频率可调的交流电流就称逆变。
- The locally uniform temperature field brazing required could be achieved by using large beam diameter, large scanning radius and small beam current. 结果表明：大束斑直径、大扫描半径和小束流的扫描方式可以获得钎焊所需的局部均匀的温度场。
- The result of calculation indicates that if ripple factorof beam current is kept within 9%,the reproducibility can be controlled 1 %. 结果表明只要束流纹波在9%25以内，剂量重复性可控制在1%25以下。
- The design of the gun is commonly defined by perveance, beam current, waist radius, waist position and cathode current density. 它的设计主要有导流系数、流、腰半径、腰位置以及阴极电流密度。
- This paper describes in detail the AVL Company developing process of modern engine air ports,the testing technologies of air ports,the eddy current adjustment in cylinder head,CAD/CAM for the air ports and the evaluation methods for air ports. 详细地介绍了AVL公司现代气道开发流程、气道试验技术、缸盖涡流调整、气道CAD/CAM及气道评价方法。
- These collective instabilities can be severe in the LHC because of the large beam current needed to provide high luminosity. 这种集体不稳定性在LHC中会变得更严重，因为为了达到更高的亮度，我们需要更大的粒子束。
- The current adjustment modes of OLTC(On-Load Tap-Changer)ar e either mechanical or power electronic,which usually has complicated structure, big size,slow regulative speed and high failure rate. 国内外现有的机械式和电力电子式有载调压变压器分接头的调节方式,具有结构复杂、体积大、调节速度慢、故障率高等不足。
- In order to minimize evaporation and loss of Mg, the considerable increasing of accelerating voltage, beam current and welding speed is preferred. 为减小镁元素烧损，在电子束焊接时可适当增加焊接的加速电压与束流，加快焊接速度。
- As the gas pressure in discharge chamber varies within the operation range the percentages of metal and halogen ions in total beam current vary with it. 那就是,放电室内的气压在工作范围内变化时,离子束中金属离子和卤素离子的含量也都随之改变。
- The structure of the MIGmust be carefully selected, as the tiny change on it will affect beam performance highly, and beam current will fluctuate punily. 同时，还发现由于阳极结构的变化导致阴极电场分布的变化，使电子注的注电流在各因子变化过程中出现了微小的扰动。
- The electron cloud effect limits the performance of several accelerators with high beam current, such as SLAC and KEK B factories, the CERN SPS and the CERN PS. 电子云效应限制了几台加速器的高束流密度运行;例如SLAC和KEK的B工厂;CERN的SPS与PS.
- In this dissertation, the effects of input power, electron beam voltage, electron beam current and focusing magnetic field on output power have been studied. 本论文还分析了输入功率、电子注直流电压，电子注直流电流和聚焦磁场对输出功率的影响。
- Improve medium beam current implanter of EATON company of US gives off big beam current, to bring high speed mobility into actuality in production, speeding up technology process. 标准注入参数的调整，以及实现高速注入所应采取的各种手段，尽量发挥离子注入机的潜能，使中束流注入机也可以注入大束流，在生产上实现高速机动，加快了工艺流程。
- The adaptive welding current adjuster based on the minimum variance theory is designed. 设计了基于最小方差调节的自适应焊接电流调节器。
- Cutting current adjusted from 10A to maximum continuously for different work piece, different thickness and different cutting speed, good cutting surface. 切割电流从10A到最大输出电流连续可调，可满足不同工件材料、厚度和切割速度的要求，切口美观.
