您要查找的是不是:
- baud or baud rate 波特率
- Gets or sets the serial baud rate. 获取或设置串行波特率。
- What baud rate, or range of baud rates, is supported? 是否支持波特率或波特率的范围?
- The Baud Rate Field should contain only numbers. “波特率”字符域只能含有数字。
- SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS. //设置波特率;奇偶效验;数据位;停止位.
- The baud rate of serial-port is set to be 19200bps. 串口采用19200bps的波特率。
- DWORD BaudRate;// current baud rate? 指定当前的波特率?
- The effect of full bit error on the baud rate is also analysed. 分析了整位误差对波特率误差的影响。
- Therefore in referring to the data rate of a MODEM, use bits/s (or kbits/s, etc.), not baud rate. 因此,调制器的数据速率往往用比特率(bits/s 或 kbits/s等)而不用波特率表示。
- "Invalid baud rate;the baud rate must be a positive value. "无效的波特率;波特率必须是个正数。
- You should consider either increasing the baud rate used for performing the installation, or performing a Text Mode installation. 您要么通过提高波特率提升安装效率,要么使用文本模式安装。
- One-fourth the rated speed of the associated equipment ; in transoceanic telegraph, one-fourth of full speed or 12.5 baud or 16 + wpm. 有关设备额定速度的四分之一;在越洋电报中,指四分之一全速或12.;5波特或每分钟16字。
- Class using the specified port name, baud rate, and parity bit. 使用指定的端口名称、波特率和奇偶校验位初始化。
- Class when you want to specify the port name and the baud rate. 当要指定端口名称和波特率时,请使用此构造函数创建。
- The baud rate specified is less than or equal to zero, or is greater than the maximum allowable baud rate for the device. 指定的波特率小于或等于零,或者大于设备所允许的最大波特率。
- Baud rate, word length, stop bits, and parity are adjustable from keypad. 波特率、字节长度、停止位以及奇偶位可以在面板上调节。
- The error of baud rate setting is a very important parameter in communication. 波特率设置的误差是通讯中一个很重要的参数。
- Through the test result,it has not delay when 8051 SC COM baud rate is 2400bps. 实际测试中,在8051串口波特率在2400bps时,对数据打印没有明显延时。
- Mode one and changeable 8 bits baud rate are adopted during communication. AT89C5通讯采用串口方式1,波特率8位可变。
- Through the software to achieve the data format and matching the baud rate. 本方法通过软件来实现数据的格式、波特率的匹配。