您要查找的是不是:
- base material thickness 基材厚度 -印制电路板的
- Effective moisture of base material mixture is one of the important indices evaluating thick layer base material spraying bio-slope engineering. 摘要基材混合物的有效持水量是评价厚层基材喷射植被护坡效果的重要指标之一。
- The influence disciplinarian of air speed, material thickness and distribution mode on mixing behavior of particles in fluidized bed was gained, which provide with designing base of MSW Incinerator. 得到了表观风速、料层厚度以及布风方式对流化床颗粒混合行为的影响规律,为流化床垃圾焚烧试验台的设计提供了依据。
- Pure Copper base material ensures excellent heat dissipation. 纯铜基底确保散热效果。
- The base material is made of hollow oval tube with Surface-Rafah. 2、车篮采用钢丝制做。3、手柄为塑料材质。
- Material Thickness Measurement Service Agency of Guangzhou Shipyard International Co. Ltd. 广州广船国际股份公司材料测厚服务部。
- To optimize material usage, flat blank nominal material thickness will be used along with the minimum inside form radii to calculate material used. 为提高材料的利用率,将使用最小的内侧半径及平的材料厚度来计算材料的用量。
- The machine is very efficient in heating, pressing, cooling the base material. 这台机器在加热、压制、冷却原材料方面效率很高。
- Found through experiments on the nano-crystalline thin bring that material thickness at the interval, GMI effect increases with increasing thickness. 通过实验发现对 纳米晶薄带来说,材料厚度在 到 区间,GMI效应随厚度的增加而增大。
- Which the alloying of the base material,surface reinforce ment of dents... 根据金属表面强化技术的最新发展,简要列举了主要的可行性工艺方法。
- To understand the mechanics of wafer warpage, research is performed on the effect of the lift-off procedure and material thickness on wafer warpage. 本研究进一步为了解晶圆翘曲的力学特性,研究雷射剥离过程及材料厚度,对氮化镓发光二极体晶圆翘曲之影响。
- Methods The MAG gel with Carbomer 934 as base material was prepared. 方法 以卡波姆 934为辅料,制备甘草酸单铵凝胶剂;
- It is remarkable that it is sacttering to lights,that is it could adjust the luminousness of light intensity and UV Rays by changing the claddings and material thickness. 值得一提的是:该类膜材对光线有散射能力,即它可以通过调节覆层和材料厚度来调节光强度和紫外线的透过率。
- The pilot full diameter will extend through the stripper and be long enough to locate the stock before the stripper contacts the material (one material thickness). 引导冲应通过脱料板并延伸足够长,在脱料板接触材料之前,引导冲必须导正料带一个料厚。
- Abstract: The relation between the line attenuation coefficient and the material thickness of FTO has been studied, and the function between them has been given. 摘 要: 用数值模拟的方法研究了FTO客体材料的线吸收系数随着穿透材料深度的变化关系,并拟合出材料有效线吸收系数与厚度之间的函数表达式。
- Note: The hydrophilic coating base material is executed by the aluminium foil used for air conditions. 说明:亲水涂层铝箔的基材按空调器用铝箔执行。
- Base material of self-adhesive product: cushioned material in bag and packing area. 水上救生品涂胶产品的基材,箱包,鞋材,包装行业的缓冲:水上运动浮力器材
- It is widely used for the package of foods, biscuit, medicine, base material of vacuum aluminum plating. 广泛应用于食品、饼干、药品包装、真空镀铝基材等。
- This thesis analyze limite precision between tension and roller loosed loop guage control system,so this require to improve material thickness precision,use roller of minimum eccentricity in first machine and DAGC. 分析出张力与辊缝闭环的厚控系统存在极限精度,所以要求提高坯料厚度精度、第一机架用偏心最小的轧辊和DAGC。
- Sound-proof in HVAC, base material of self-adhesive prlduct: cushioned material in bag and packing area. 空调行业的保温,隔热,隔音材料,涂胶产品的基材,箱包,包装行业的缓冲材料。