您要查找的是不是：
- ball bearing center plate 滚珠心盘
- THE INTERIOR IS THE COMBINATION AND BALL BEARING. 内部使用滚珠轴承之组合。
- Deep groove ball bearing is a bearing. 深沟球轴承是轴承的一种。
- A ball bearing had bounced off the submarine's hull. 潜艇船身上崩掉了一个滚珠轴承。
- Test Method for Low-Temperature Torque of Ball Bearing Greases (05. 滚珠轴承润滑脂的低温扭矩的试验方法(05。
- Ball bearing unit is with excellent running precision and easy re-greasing. 带座外球面轴承具有良好的旋转精度，可方便的再润滑。
- One slecve and one ball bearing life expectance:30,000 hours minimum. 一个含油轴承和一个滚珠轴承预期寿命：至少30，000小时。
- Its diameter was 6.5 mm and diameter of bore center was 2.1 mm. 中空拉力螺纹钉螺纹直径6.;5mm;中心孔直径2
- What's the object of using ball bearings? 使用滚珠轴承的目的何在?
- The ball bearings reduce the friction on the joint. 滚珠可以减小结合处的摩擦。
- Roll restoring moment and equivalent friction radius are introduced in vehicle dynamics model,and mechanics model of center plate is simplified. 在车辆动力学模型中引入侧滚回复力矩和等效摩擦半径,并对心盘进行力学简化。
- Film Roll is held in place, top and bottom, with Ball Bearing Chucks. 薄膜卷固定在适当的位置，顶部和底部有滚动轴承夹头。
- The influence of the misalignment caused by a crankshaft deformation on the trajectory of the journal bearing center was studied. 研究了因变形而引起的曲轴倾斜对轴颈轴心轨迹的影响。
- Self-aligning ball bearing is a species of crane accessories equipment. 调心球轴承是种起重机配件设备。
- Thrust ball bearing is separable bearing and only can be subject to axial load. 推力球轴承为可分离型轴承，只能承受轴向载荷。
- Remove the handle knob and apply a few drops of oil to the ball bearing. 把手柄的胶粒拉开然后在培林位置注入一至两滴新的润滑油。
- Automation production was achieved by applying ball bearing,tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate,and control the pull off distance. 利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离,从而达到自动生产目的。
- Permanently sealed and lubricated ball bearings front and rear. 前后端盖装有永久密封和自润滑的滚珠轴承。
- Mount a pair of (8) collet with same specification onto the (4) clamping fixture, directly insert the clamping chuck into the opening location if bearing center if clamping fixture. 将一对规格相同的8夹头安装在4机器夹具上，直接将夹头插入夹具轴承中心开口处即可。
- The object of using ball bearings is to reduce the friction. 使用滚球轴承的目的在于减少磨擦。
