您要查找的是不是：
- CONFIGURE state Normal (LOOPBACK)CFR:AP A,DS1 B,EXT or CFR:AP A,DS1 B,NORM A = the AP's logical number,and B = the AP DS1 number. 将状态配置为正常(回送)CFR:AP A, DS1 B,EXT or CFR:AP A, DS1 B,NORM A = AP 的逻辑号，和 B = AP DS1 号。
- ButtonEMS CLI Command Where REMOVERMV:AP A, DS1 B,[UCL]A = the AP's logical number, B = the AP DS1 number, and UCL = unconditional. 按钮EMS cli 命令 其中 退出服务RMV:AP A, DS1 B,[UCL]A = AP 的逻辑号，B = AP DS1 号，和 UCL = 无条件的。
- CONFIGURE state Normal (LOOPBACK)CFR:AP A, DS1 B,EXT or CFR:AP A, DS1 B,NORM A = the AP's logical number, and B = the AP DS1 number. 将状态配置为正常（回送）CFR:AP A, DS1 B,EXT or CFR:AP A, DS1 B,NORM A = AP 的逻辑号，和 B = AP DS1 号。
- RESTORERST:AP A,DS1 B,A = the AP's logical number,and B = the AP DS1 numberDIAGNOSEDGN:AP A,DS1 B,A = the AP's logical number,and B = the AP DS1 number. 恢复RST:AP A, DS1 B,A = AP 的逻辑号，和 B = AP DS1 号诊断DGN:AP A, DS1 B,A = AP 的逻辑号，和 B = AP DS1 号。
- button EMS CLI Command where REMOVERMV:AP A,DS1 B,(UCL)A = the AP's logical number,B = the AP DS1 number,and UCL = unconditional 按钮EMS CLI 命令其中退出服务RMV:AP A, DS1 B,(UCL)A = AP 的逻辑号，B = AP DS1号，和UCL=无条件的
- To restore all AP DS0s of an AP DS1 to the ACTIVE state,restore the AP DS1. 要使 AP DS1 所有的 AP DS0 都恢复到 ACTIVE 状态，可恢复 AP DS1。
- To restore all AP DS0s of an AP DS1 to the ACTIVE state, restore the AP DS1. 要使 ap DS1 所有的 ap DS0 都恢复到 ACTIVE 状态，可恢复 ap DS1。
- The technician has requested a time to perform maintenance on the AP DS1s at the 5ESS DCS. 要求技术人员花费一定时间对 5ESS DCS 上的 AP DS1 执行维护。
- She repeated the gist of the AP bulletin. 她把美联社电讯的要点又讲了一遍。
- RESTORERST:AP AA = the AP's logical number. RESTORERST:AP aa = AP 的逻辑号。
- INITINIT:AP A,FULL|APPLA = the AP's logical number. 初始化INIT:AP A,full|APPLA = AP 的逻辑号。
- RMV:AP A,[UCL]A = the AP's logical number,and UCL = unconditional. RMV:AP A,[UCL]A = AP 的逻辑号，和 UCL = 无条件的。
- RMV:AP A,[UCL]A = the AP's logical number, and UCL = unconditional. RMV:AP A,[UCL]A = AP 的逻辑号，和 UCL = 无条件的。
- It shows the AP,DS1,and RCS associated with the selected DS0,along with the maintenance and alarm status of each. 该页将显示与所选 DS0 相关的 AP、DS1 和 RCS，及其各自的维护和告警状态。
- It shows the AP, DS1, and RCS associated with the selected DS0, along with the maintenance and alarm status of each. 该页将显示与所选 DS0 相关的 AP、DS1 和 RCS，及其各自的维护和告警状态。
- It shows the selected DS1,all DS0s for that DS1,the AP on which the DS1 port exists,and the RCS,maintenance state,and diagnostic state of each DS0. 该页显示选取的 DS1、该 DS1 的全部 DS0、DS1 端口所在的 AP 以及每个 DS0 的 RCS、维护状态和诊断状态。
- The AP in the GUI will be a lighter gray. GUI 中的 AP 将会是浅灰色。
- Unlike AP DS1s, you cannot do an unconditional remove on a AP DS0. 不象 AP DS1，不能使 AP DS0 无条件退出服务。
- Regrettably, the AP did not correct its error. 遗憾的是，美联社没有改正他们的错误。
- Unlike AP DS1s,you cannot do an unconditional remove on a AP DS0. 不象 AP DS1，不能使 AP DS0 无条件退出服务。
