您要查找的是不是:
- axially compressive strut 轴压杆件
- The effect of the width-to-thickness ratio and the axial compressive ratio on the hysteretic behav... 随着轴压比增加,构件的最大承载力降低,承载力退化。
- Axial compress is produced by the tension of prestressing beam, which engenders the third moment of column. 预应力筋的张拉会造成梁的轴向压缩,在柱中引起第3弯矩,但在工程设计中通常忽略这一因素影响。
- Finally, based on the tested and numerical analysis results, a formula to calculate the buckling load of composite pipes under axially compressive load is obtained by correcting Perry formula. 最后基于试验结果与数值分析结果,通过修正Perry稳定计算公式,得到了CFRP-铝合金组合长管屈曲荷载的计算公式。
- To study the axial compressive behavior of FRP-concrete-steel double-skin tubular stubs(DSTSs),experiments of 3 circular steel tubes and 10 DSTS specimens were carried out. 为研究FRP-混凝土-钢双壁空心管短柱的轴压性能,完成了3个圆钢管短柱和10个双壁空心管短柱试件的轴心抗压试验。
- This paper analyses the beam of variablecross-section (variable stiffness) loaded by axial compressive forcestogether with transverse ones, which is applied in drill strings. 分析了受纵横弯曲载荷联合作用的变截面(变刚度)梁柱问题;并在钻柱力学分析中得到应用.
- Axial compress expander forming has been used to production of high-grade thin-wall three-way connection made of red copper used for building and refrigeration. 介绍了采用轴向压缩胀形成形原理,生产高档建筑及制冷系统用薄壁紫铜管三通接头的成形工艺和模具结构。
- In this paper, the forming proccess of Tee tube hydro forming (THF) were studied in detail. Finite element model of THF was established. The influence of processing parameters to the axial compressive bulging was analyzed. 本文详细研究了多通管(以三通管为例)液压胀形的成形过程,建立了多通管液压胀形的有限元模型,分析了轴向压缩胀形过程中各工艺参数对成形过程的影响,研究了三通管复合胀形三个工艺力的加载路径,分析比较了三通管固体介质胀形与液压胀形,最后,研究了三通管液压胀形控制模式。
- members under axially compressive force 轴压构件
- Through axially compressed tests of 32 cylinder concrete columns, the performance of concrete confined by carbon fiber composite sheets is studied. 摘要通过32个混凝土圆形试块的轴压试验,研究了碳纤维布约束混凝土的受压性能。
- A simplified and efficient method is developed in order to analyze the vibration problem of axially compressed imperfect rectangular plates. 摘要采用简易高效的方法分析受压缺陷矩形板的振动问题。
- Mechanical property of axially compressed concrete filled circular CFRP-steel tube stub columns is analyzed based on experimental results. 以试验为基础,对CFRP-钢管混凝土轴压短柱的受力性能进行了分析。
- The whole process analysis is carried on of the loading capacities of the axially compressed concrete filled CFRP-steel tube and the stress-strain relationships of CFRP. 目的用合成法得到CFRP(碳纤维增强塑料)钢管混凝土构件的荷载-应变关系全过程曲线并研究该新型构件的力学性能.
- axial compressive experimentation 单轴压缩试验
- The reasonable axial compression, load angle and the ratio of stirrup of special-shaped columns are gained from the contrastive analysis. 通过对比分析,得出了异形柱比较合理的轴压比和加载角度。
- The calculation formulae of critical axial compression for the composite case is given. 给出了复合材料壳体圆筒临界轴压的计算公式。
- axial compressive load and bi - axial bending 双向压弯
- ratio of axial compressive force 轴压比
- The Direct Algorithm to Design the Section Size of Compression Strut 压杆截面尺寸设计的直接计算法
- allowable axial compressive stress 许用轴向压应力