您要查找的是不是：
- axial compression force ratio 轴压比
- The critical instability flowrate is proportional conversely to fluid pressure and axial compression force of pipe section, but is proportional to the axial tensile force. 并且失稳临界流速随流体压力和管截面轴向压力的增 加而下降，随管截面轴向拉力的增加而上升.
- ratio of axial compressive force 轴压比
- ratio of axial compressive force to axial compressive ultimate capacity 剪跨比
- Correlation between the maximal axial compression force and bone density of fresh and embalmed vertebral bone 新鲜与防腐标本椎体骨密度及最大抗压力的相关研究
- Analysis of ratio of axial compressive force to resisting shear strength of reinforced concrete beam-column joints 轴压比对梁柱节点抗剪强度影响的分析
- ratio of axial compressive force to axial compressive ultimate capacity of section 轴压比
- The Discussion Ratio of Axial Compressive Force to Axial Compressive Ultimate Capcity of Section to Frame Column in the Earchquake Zone 浅谈地震区框架柱轴压比限值
- The reasonable axial compression, load angle and the ratio of stirrup of special-shaped columns are gained from the contrastive analysis. 通过对比分析，得出了异形柱比较合理的轴压比和加载角度。
- Friction and sealing in tube hydroforming with axial compressive force 管材轴压液力成形中的摩擦与密封
- The plastic hinge model can also be used for the cantilever tapered castellated beam-columns when the axial compression ratio is below a certain value. 当轴压比较小时，悬臂楔形蜂窝压弯构件可以近似的采用塑性铰模型；当轴压比较大时，利用塑性铰模型分析是不合适的。
- And axial force is applied to adobe masonry specimen, which are laid by varies marshaling way, to study their axial compression performance and failure forms. 使用不同的砌筑方法砌筑土坯砌体试件，对试件施加轴心压力，研究砌体轴心受压性能、破坏形态；
- members under axially compressive force 轴压构件
- An Experimental Study on the Carrying Capacity of Hollow Reinforced Concrete Shear Wall under Axial Compressive Force 轴压空心剪力墙试件承载力试验研究
- By taking axial compression ratio, local angle, stirrup space, the ratio of stirrup and etc. into consideration, the author studies the displacement ductility ratio for speical-shaped columns such as L shape, T shape and t shape. 摘要通过考虑不同轴压比、不同加载角度和不同配筋率等情况，对异形柱位移延性比进行了研究。
- Compressive Load Capacity of the Welded Hollow Spherical Joint with Pipe Stiffener Under Axial Compressive Force 钢管加劲焊接空心球节点的受压承载力分析
- In addition, on the basis of experiment of SRC walls, with the help of program CANNY, the limit value of axial compression ratio of SRC wall was analyzed and proposed for seismic design. 另外，通过构件低周反复加载试验与计算机数值仿真技术相结合的方法，分析了型钢混凝土剪力墙构件的轴压比限值问题，并提出了设计建议。
- EXPERIMENTAL RESEARCH ON STABILITY PARAMETERS FOR I-SECTION ALUMINIUM ALLOY BARS LOADED BY AXIAL COMPRESSIVE FORCE 工字形铝合金轴心压杆稳定系数的试验研究
- By muting certain requirements of ductility, the limit values of axial compression ratio of C80 SRHC columns are put out, and the influence of stirrup ratio on it is also analyzed. 在满足一定位移延性的基础上;提出了C80型钢高强混凝土柱的轴压比限值;并就配箍率对轴压比限值的影响进行了分析;进一步提出了与不同配箍率相关的轴压比限值.
- PLASTIC HINGE LINE MODEL OF RECTANGULAR HOLLOW SECTION JOINTS UNDER AXIAL COMPRESSIVE FORCE 计及轴向压力的方管节点塑性铰线模型
