您要查找的是不是:
- asymmetrical rolling process 异步轧制工艺
- In this paper, an upper bound solution model For asymmetrical rolling and the relationships between its parameters are presented. 本文提出了非对称轧制过程的全粘着三角形上限解模型,并建立了模型参数关系。
- The system pressure had very big fluctuation during rolling process. 在轧钢过程中系统压力出现大幅度波动。
- Yes,when steel product must be accurated in size and must have a smooth surface,the cold rolling process must be used. 能。如果钢材的尺寸精度要求很高,表面必须光洁,那么就需要进行冷轧。
- Rolling process adopts the advanced untwisted rolling device, keep wiring from twist and tension. 成卷工序采用先进的无扭曲成卷机,保证在布线中无扭曲和拉伸。
- The electronic workpiece acceleration ensures the quality of the decisive start of the rolling process. 电子控制的工件驱动装置确保了最开键的滚轧起始阶段的质量。
- Tungsten carbide can withstand the abrasive action of hot metal during the rolling process far better than cast iron. 碳化钨耐受轧制过程中热金属轧件磨蚀作用的能力比铸铁大得多.
- Yes. when steel product must be accurated in size and must have a smooth surface, the cold rolling process be used. 能。如果钢材的尺寸精度要求很高,表面必须光洁,那么就需要进行冷轧。
- A brick element re-meshing technique was presented for shape-metal rolling process. 摘要提出了一种适用于型钢轧制及其类似过程的六面体网格重构方法。
- In order to meliorate efficiency, it is decided to adopt rolling process in construction. 但碾压贫混凝土基层在国内应用较少,现行规范找不到依据。
- The results show that the grain of the strip was refined in the cold rolling process due to the DRX and DRV. 结果表明:在冷轧过程中,因动态再结晶和动态回复,使薄带的晶粒进一步得到细化。
- The influences of rolling process and impurity atoms on the texture developments were also analysed. 同时也分析了钢板变形过程及杂质原子对织构形成的影响。
- One of the method of curbing plate bending in jobbing sheet rolling process was researched. 研究了在中板轧制过程中抑制板坯弯曲的措施之一。
- During the cool rolling process of SUS301 stainless steel,the punctual flaws and cracks are offen observed. SUS301不锈钢在冷轧过程中表面经常出现点状缺陷及裂纹。
- The deformative charateristics of cementite of white cast iron during the rolling process was investigated. 研究了惨碳体在白口铸铁轧制变形过程中的变化特点。
- Synopsis There are some factors that cause the formation of hot strip side-camber in the rolling process. 板带轧制过程中因受某些因素影响会形成侧弯。
- Most people's faces are asymmetrical. 多数人的脸并不对称。
- Test results of lead work-pieces verify the feasibility of rolling process and die design. 铅试件辗压试验结果证明辗压成形工艺和模具设计的可行性;
- Experimental study on asymmetrical rolling with work roll edge contact 异径轧制低碳钢的力学性能参数与粗糙度实验研究
- This paper is written to introduce different magnesium alloy rolling methods like hot rolling,cold rolling,cross rolling,asymmetrically rolling,accumulative roll-bonding(ARB). 介绍了热轧、冷轧、交叉轧制、累积叠轧、不对称轧制等不同的镁合金板材轧制工艺。分析了不同轧制工艺对应板材的组织特点及晶粒细化机制。