您要查找的是不是:
- assembly contact analysis 装配接触分析
- Parameterized solidmodeling for the TI worm drive is achieved.Tooth contact analysis is developed forthe TI worm gearing with assembly errors. 实现了TI蜗杆传动的三维参数化设计,对含有装配误差的TI蜗杆传动的啮合接触情况进行了分析。
- After the proper backlash is achieved, perform the Gear Contact Analysis procedure. 在得到合适的齿隙后,执行齿轮接触分析程序。
- The Prediction Analysis of Assembly Contact States with Errors 基于误差的装配接触状态预测分析
- A tooth contact analysis model with a rotating freedom was developed by coupling freedom method to determine the stress and strain field of gears. 摘要利用自由度耦合方法建立了县有旋转自由度的齿轮接触模型,用以分析齿轮的应力应变场。
- The computational models for tooth contact analysis (TCA) and loaded tooth contact analysis (LTCA) of the face gears were established. 建立了直齿面齿轮副轮齿接触分析(TCA)和承载接触分析(LTCA)的计算模型。
- CAE is conducted on main parts of a mining truck brake, which includes structural static analysis, non-linear contact analysis, modal analysis and transient dynamic analysis. 摘要对矿用汽车制动器主要部件进行了计算机辅助工程分析(CAE),包括:结构静力学分析、非线性接触分析、模态分析、瞬态动力学分析等。
- Z.Q.Gong, K.Komvopoulos, “Mechanical and Thermomechanical Elastic-Plastic Contact Analysis of Layered Media With Patterned Surfaces.” J.Tribol, Vol.126, PP.9-17, 2004. 徐泽志、曹智强“人工关节垫片表面特徵的磨耗分析”元智大学机械工程研究所硕士论文,2005。
- On the basis of the first envelope ,the paper stresses on the tooth contact analysis of the second envelope,and the equations of a worm and a wormwheel flanks are derived . 本文在第一次包络的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。
- The fundamental causes of the frame getting stuck are found out through the finite element contact analysis on gyrating framework of aircraft launching frame. 通过对飞机回转弹射机构的有限元接触分析,找到了机构卡死的根本原因:一方面,过大应力使锥形筒体产生过大塑性变形;
- By using a dynamic contact analysis,a finite element model is developed to calculate the response of composite laminates to low velocity impact.A numerical example is given. 利用动力接触分析方法模拟冲击的接触行为,提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
- Contact Analysis for TI Worm Drive when Including Assembly Errors 存在装配误差时TI蜗杆传动接触分析
- Jack was assigned to the assembly shop of the factory. 杰克被分配到厂里的装配间工作。
- Methods The three-dimensional finite element hip models of Chiari pelvic osteotomy was constituted to observe the regularity of stress distribution according different abductor loads using the nonlinear contact analysis. 方法建立Chiari骨盆截骨术的髋关节三维有限元模型,应用非线性接触压力分析方法,观察不同的外展肌力负荷条件下关节软骨接触压力及软骨下骨应力分布。
- Based on the coordinate transformation method and gearing theory, the mathematical models for generating the rack cutter, pinion, face-gear, as well as Tooth Contact Analysis (TCA), are established. 应用座标转换法与齿轮啮合原理,本文已导出创成齿条齿面数学模式、小齿轮齿面数学模式、面齿轮齿面数学模式、齿面接触分析数学模式及控制抛物线运动误差大小之统御方程组。
- Robots are replacing people on assembly lines. 机器人逐渐代替了装配线上的工人。
- The head teacher told the school at assembly. 校长在全校学生大会上讲话。
- A legislative assembly is being held. 一个有关立法的会议正在召开。
- People have the rights of assembly and expression. 人们有集会和发表言论的权利。
- Local assembly will help sale to some extent. 在当地组装将在某种程度上促进产品销售。