您要查找的是不是：
- array output power 阵列输出功率
- The output power can never equal the input power, for there are always losses. 输出功率绝不能等于输入功率，因为总存在着损耗。
- Laser Diode Array (LDA) is attractive for its high output power and compactness. 半导体二极管列阵(LDA)具有体积小,输出功率高的优点而受到人们的广泛重视。
- Output power is stable, it can work in all weather. 输出功率稳定,可全天候工作;
- Adaptive output power minimizes interference. 可变的电源输出使干扰减小到最
- In order to increase the output power of incoherent fiber laser combination, the optimized methods are put forward, mainly concentrating on the fiber laser array. 摘要为了增加光纤激光非相干组束的输出功率，针对光纤激光器阵列提出了优化的方法。
- High output power, steady energy, adjustable, deep marking . 激光输出功率高，能量稳定，连接可调，深度雕刻。
- Check LCD dot matrix (Chinese 16 * 16), to input Chinese characters automatically format c language array output to the file directory. 取液晶点阵（中文16*16），输入汉字自动以c语言数组格式输出到目录下的文件。
- The span of wavelength is 0.6 nm,and output power is 8 dBm. 室温下;相关实验获得激光双波长间隔0.;6 nm;输出功率8 dBm。
- Power gain (18) The ration of output power to input power. 功率增益(18)輸出功率對輸入功率之比值。
- With flexible definition of fourth order cumulant of the array output signal, the spectral peak searching is not necessary for the new separable approach. 通过巧妙定义阵列输出四阶累积量矩阵,该方法不需要谱峰搜索就可以估计信号二维到达方向。
- The Mechanism of Sudden-change of Output Power of TF CO2Laser[J]. 引用该论文 陈培峰;丘军林;龚志伟;唐宗化;陈义红;陈涛.
- The control technology of maximum power point tracking(MPPT)is the maximum output power of photovoltaic cell array under given conditions of a certain environment temperature and sunshine intensity in the photovoltaic system domain. 最大功率点跟踪(MPPT)控制技术是光伏系统领域中在一定环境温度以及日照强度情况下太阳能电池阵列能够输出的最大功率。
- In order to increase the utilization ratio of solar array, a Maximum Power Point Tracking (MPPT) method should be taken to maximize its output power at any temperature and irradiation. 要提高太阳能电池的利用率,必须对其输出进行最大功率点跟踪控制,使其在不同的条件下均能输出最大功率。
- Under ideal conditions, adaptive array signal processing methods can get excellent performance and adaptive beamformers provide an improvement in array output signal-to-interference-plus-noise-ratio (SINR) in comparison with conventional beamforming. 在理想情况下，自适应阵列信号处理在阵列流形确知时，自适应波束形成能在干扰位置形成零陷，使得阵列输出信号干扰噪声比(SINR)最大。
- The output power can never equal the input power,for there are always losses. 输出功率绝不能等于输入功率，因为总存在着损耗。
- Stabile Output Power strengthens Lamp Lifespan and keep color temper coherence. 输出功率稳定，增强灯泡寿命，及色温一致性。
- The RF output power level is maximum for 13.5 VDC and minimum at 2 VDC. RF功率输出的是在13.;5V时候最大，而在2V时候最小。
- All solid-state transponders are under development with output power level lower by some 20-30 dB in the 4-6GHz band. 正在研制的全固态转发器在4-6千兆赫频段中的输出功率电平约低20-30分贝.
- Fiber Array Packaged Bar of Output Power up to 60W 60瓦半导体激光器光纤耦合器件
