您要查找的是不是：
- Al-based coating is prepared by arc spraying using Al-based cored wire. 采用铝带制作粉芯线材,电弧喷涂方法制备铝基涂层。
- Arc spraying rapid tooling manufacturing technique based on RP is a new technology of mould making. 基于RP原型的电弧喷涂快速模具制造工艺是一项模具制造新技术。
- Surface roughening is very important in arc spraying, as the coating quality depends greatly on its treatment result. 表面粗化在电弧喷涂中具有重要作用,涂层质量很大程度上取决于表面粗化预处理的效果。
- Atomization is very important in arc spraying, as the coating quality depends greatly on atomization. 雾化在电弧喷涂中具有重要的作用，涂层质量很大程度上取决于雾化效果。
- High hardness and wear resistance coating JCW-B were deposited via arc spraying. 采用电弧喷涂方法制备的高硬度耐磨损JCW-B涂层可广泛应用于工业零部件耐磨表面。
- The principle,characteristic and application of supersonic arc spraying(SAS) were introduced in this paper. 阐述了超音速电弧喷涂技术的原理、特点及其应用。
- The automatic high velocity arc spraying system was designed for remanufacturing the cylinder body of STYER engine. 采用该技术再制造的斯太尔发动机缸体性能优异,满足了使用要求。
- In allusion to the poor corrosion resistance of magnesium,a new electric arc spraying zinc type for improving the corrosion resistance is induced. 针对镁合金抗腐蚀能力比较差这一缺点,通过表面电弧喷涂锌的方法来提高其抗腐蚀能力。
- Xu B S, Liang X B, Ma S N.Study on a new designed gun for high velocity arc spraying[J].China Surface Engineering, 1998, 11 (3): 16-19. [6]徐滨士;梁秀兵;马世宁.;新型高速电弧喷涂枪的开发研究[J]
- By the introduction of the Arc Spraying(AS) technology,the research and application of the technical were analyzed,and the inspection criterions were discussed. 通过对电弧喷涂的技术介绍,对该技术的研究及应用进行了分析,并对检验的规范和标准进行了探讨。
- High velocity arc spraying technology is a new technology developed on the basis of conventional arc spraying technology and a key technology in remanufacturing engineering. 摘要高速电弧喷涂技术是在传统电弧喷涂技术基础上发展起来的一项新技术，也是再制造工程的关键技术之一。
- By the introduction of the Arc Spraying (AS) technology, the research and application of the technical were analyzed, and the inspection criterions were discussed. 摘要通过对电弧喷涂的技术介绍，对该技术的研究及应用进行了分析，并对检验的规范和标准进行了探讨。
- Metallic arc spraying for rapid mould making was a new technology developed in recent years which has played more and more important roles in manufacturing industry. 金属电弧喷涂快速制模工艺,是近几年发展起来的新技术,在制造业中发挥了越来越重要的作用。
- By means of the orthogonal test and the variance analysis, the influence of dry blasting steel grit parameters on blasting result and bond strength of arc spraying was conducted. 应用正交试验法对干喷钢砂工艺参数对喷砂效果和结合强度的影响进行了试验研究,确定了优化的干喷钢砂电喷涂工艺规范。
- The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis. 采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对JCW-B涂层结合强度和耐磨性的影响。
- Al-base cored wires were prepared by using Al-strip to wrap metal powder, and their parameters for arc spraying process have been optimized. Typical layered Al-base coatings were fabricated. 采用Al 带包裹金属粉成功制备了铝基粉芯丝材,对其电弧喷涂工艺进行了优化,得到了孔隙率较低的优化喷涂工艺参数,成功制备出了具有典型层状结构的铝基涂层。
- The result indicated that the technology of rapid tooling through the combination ofelectroforming with arc spraying is more economical and timesaving than the traditionalmachining and electroforming. 结果表明电铸与电弧喷涂相结合是一种比传统加工与电铸更经济快速的制模方法。
- There exists a optimum blasting angle,at which both the fractal dimension value of the substrate surface and the adhesive strength of arc spraying coating achieve their maximum respectively. 并且存在一个最优喷砂角度，此时基体表面形貌的分数维最大，电弧喷涂层的结合强度值也最大。
- A new method for testing the reproducibility of gypsum model for arc spraying tooling is introduced in detail from preparation of the gypsum pulp to the process of fabricating the gypsum model. 从石膏浆料的配制到石膏模型制作过程,详细地介绍了一种测试电弧喷涂用石膏模型复型性的新方法,并就水膏比和增强材料对石膏模型复型性的影响进行了研究。
- Owing to the existence of micro hole in the coating of arc spraying, the excellent property of friction and wear can be obtained,especialy under the condition of a rapider sliding speed. 另外,电弧喷涂涂层中显微孔隙的存在,是使其具有优良摩擦磨损性能的主要原因,尤其在较高的滑动速度下,它的优异性能更加明显。
