您要查找的是不是:
- anticorrosive alloy coating 防蚀合金涂层
- Reflector: High temperature processed, layers of alloy coating films. 反射:高温处理后,合金涂层层薄膜。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate. 对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
- The average microhardness of the laser clad silicide alloy coating ranges from HV650 to HV750. 涂层组织显微硬度在HV650-750之间,沿层深分布均匀;
- The results showed that the grain size and the corrosion resistance of the alloy coat on tinplate increased as the reflowing time exten... 结果表明,随着软熔时间的延长和软熔温度的升高,镀锡板合金层的晶粒度增大,镀锡板的耐蚀性增强。
- The corrosion resistance of the alloy coat on tinplate was directly related to the life span of the tinplate as a food packaging material. 镀锡板合金层的耐蚀性好坏直接关系到镀锡板用作食品包装材料时的寿命。
- Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc. 电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。
- In this thesis, a Ni-W alloy coating was produced by electrodeposition on a cupreous substrate. 镍钨合金镀层由于其高的硬度、耐磨及耐蚀性而被作为代铬镀层用于金属表面处理。
- The hot dip Zn Ni alloy coating provides good anticorrosion performance. Two kinds of materials, Q235 and Q345 used for galvanizing Zn and Zn Ni alloy. 对Q2 35和Q345两种材料表面热浸镀纯Zn和Zn Ni合金 ,研究Ni对热镀锌耐蚀性的影响。
- The white corrosion products on hot dip Zn Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
- This paper describes material,equipment and processing of high frequency induction remelting technology for self fluxed alloy coating. 本文介绍了自熔合金涂层高频感应重熔工艺技术的设备、材料、工艺和应用效果。
- The development of anticorrosive alloy used in foreign chlor- alkali plants 国外氯碱厂用耐腐蚀合金进展
- Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process. 通过在机械镀锌过程中添加不同量的稀土金属盐,在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
- Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc.,and has been widely used. 电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。
- Electroplated Cu-Sn alloy coating is good in decoration and solderability, low in cost, non-toxic, not irritable, etc., and has been widely used. 电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。
- The Company is -5% zinc aluminum - rare earth alloy coating steel wire, steel strand, the main drafter of the national standards. 本公司是锌-5%25铝-稀土合金镀层钢丝、钢绞线,国家标准的主要起草人。
- Alloy coating with high wear and corrosion Resistance plays an important role for elongating the life of hydraulic turbine transition parts. 高耐磨耐蚀涂层对提高水轮机过流部件的使用寿命具有重要作用。
- The recommended passivating solution could be used not only for passivating zinc hot dipped coating but also for Zn-Ni and Zn-Fe alloy coating. 结果表明,该钝化液适合于热浸锌合金镀层的表面钝化处理,亦适用于电镀锌及锌合金镀层、锌合金压铸件等的钝化处理,应用范围宽,且工序简化,抛光和钝化一步完成。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries