您要查找的是不是:
- anode gas diffusion layer 阳极扩散层
- By using the larger porosity of the gas diffusion layer, it can effectively prevent the anode side of the membrane from being dry, the cathode side of the membrane from flooding. 当使用孔隙度较大的气体扩散层,可以防止薄膜靠阳极侧乾化,薄膜靠阴极侧淹水,并可把各层达稳态的时间缩短。
- The gas diffusion layer of air electrode was prepared by the rolling method with acetylene black and 60% PTFE emulsion as raw materials. 以乙炔黑、60%25PTFE乳液为原料,用辊压法制备空气电极的气体扩散层。
- Until now, there have been many attempts to increase fuel cell performance by developing or modifying the gas diffusion layer (GDL). 直到现在,已有许多研究证实,改良气体扩散层的碳微孔层性质可以促进燃料电池的性能提升。
- Gas diffusion layer (GDL) is one of the most important electrode components in proton exchange membrane fuel cell (PEMFC). 在质子交换膜(PEM:Proton Exchange Membrane)燃料电池中,气体扩散层(GDL:Gas Diffusion Layer)是电极的重要组成部分,其结构和性能参数对电池的综合性能有重要的影响。
- The sublayer sandwiched between gas diffusion layer (GDL) and cat alyst layer can reduce water saturation in the catalyst layer and optimize gas and water transport. 在催化层和扩散层之间加入的扩散亚层能够减小催化层的水饱和度,优化扩散层中的水和气传输。
- To study the effect of microstructure of porous gas diffusion layer(GDL) in proton exchange membrane fuel cell(PEMFC) on simulation, an effective method must be used to express the microstructure. 为了研究质子交换膜燃料电池扩散层多孔材料微结构对仿真结果的影响,首先必须找出一种有效的方法来描述其微结构。
- Micro porous layer (MPL) was added between gas diffuse layer and catalyst layer. 摘要:微孔层是加在气体扩散层与触媒层之间,主要功用是藉由毛细作用力帮助液态水的排除。
- Study of Preparing Paste Used for Gas Diffusion Layer for PEMFC 质子交换膜燃料电池气体扩散层涂料制备研究
- Influence of gas diffusion layer on the life of air electrode 气体扩散层对空气电极寿命的影响
- Influence of the PTFE contents on the performance of the gas diffusion layer PTFE载量对气体扩散层性能的影响
- Progress of Gas Diffusion Layer for Proton Exchage Membrane Fuel Cells 质子交换膜燃料电池气体扩散层的研究进展
- Fractal Dimension Computation Methods for Gas Diffusion Layer of PEM Fuel Cells 质子交换膜燃料电池扩散层分形维数计算方法研究
- Influence of gas diffusion layer morphology on the performance of proton exchange membrane fuel cell 扩散层形态对质子交换膜燃料电池性能的影响
- The anode gas should be humidified as much as possible, when PEMFC operated at low current density. 故PEMFC在小电流密度工作时,应该使阳极气体充分增湿;
- Gas Diffusion Layer for Polymer Electrolyte Membrane Fuel Cell Electrodes--Preparation of Carbon Fiber Paper 质子交换膜燃料电池用气体扩散层--碳纤维纸的制备
- Parent [M+H](superscript +) ion was produced by splitting argon with anode gas ionization source. 监测极限、回收率、线性相关性、重现性等有效参数都得以侧定。
- The energy-saving and consumption-reducing theory of gas diffusion anode(GDA) for zinc hydrometallurgy is introduced.When the lead-silver anode is replaced by GDA,energy will be reduced about 50%. 介绍了气体扩散阳极(氢扩散阳极)在湿法炼锌上的节能降耗原理,用气体扩散阳极代替普通阳极将降低50%25左右的能耗;
- It is advisable to decrease the humidifying level of anode gas when operating at high current density to avoid two-phase flow in cathode so as to improve mass transfer. 而在大电流密度工作时,应该适当降低阳极的增湿程度以降低阴极两相流的机会,从而改善阴极的传质状况。
- gas diffusion layer 气体扩散层