您要查找的是不是：
- airless spray coating 无气喷涂
- EURO-PE27,can be applied by airless spray. PE27， 可以采用无气喷涂。
- Metacaluk Cable Coating can be applied using a paintbrush for small application or it can be applied with an airless spray equipment for more extensive projects. 麦塔克电缆涂料可以用油漆刷施作于小?围或用空压机施作更大?围的区域。
- Spray coating mode with compound functions. 采用喷涂方式，具有复合功能。
- Shanghai Industrial Spray Coating Equipments Factory. 上海工业喷涂设备厂。
- Harmless to grain cargo. Applicable in thick coats by standard airless spray equipment. 采用标准的无空气喷涂设备得到规定的厚涂层。
- Air spray, airless spray and brush spray which are applied to both of our water-based products and oily products have been adopted in our construction plan. 本公司生产的水性混凝土彩瓦漆和油性混凝土彩瓦漆均可采用有气喷涂，无气喷涂，刷涂等方式予以施工。
- The spray coating is a new technology for fiber mechanical construction. 耐火纤维喷涂是纤维机械化施工的一种新工艺。
- Virtual spraying with high-pressure airless spraying gun at the above sites leads to thinner coating! 使用高压无气喷枪喷涂导致上述部位虚喷,漆膜厚度没有达到工艺要求。
- Applicable by airless spray. 可用无空气喷涂法进行施工。
- The application of airless spraying to steel structure coating is an effective measure for ensuring spraying efficiency and film's thickness quality. 无气喷漆应用于钢结构件涂装是保证喷涂效率和膜厚质量的有效措施。
- Keywords High Pressure Airless Spray;Air Spray;Mould Coating; 关键词高压无气喷涂;空气喷涂;铸型涂料;
- Spraying method whether by air spray, airless spray, hot air spray or hot airless spray should be in accordance with the following. 空气喷涂,无空气喷涂,热空气喷涂或无空气热喷涂均应遵循以下原则。
- Pneumatic rotary orifice plate and operation trolley are also available for the full piece cowskin spray coating. 喷整张牛皮配气动旋转孔板及操作台车。
- The lampstand uses the high quality cold rolled plate surface spray coating to become. 产品说明:灯架采用优质冷轧板表面喷涂而成。
- The outside after the acid pickling and the bonderizing, uses the static electricity epoxy powder spray coating. 外部经酸洗和磷化处理后，采用静电环氧粉末喷涂。
- The paint spraying part adopts high-pressure airless spraying method. 喷漆工部采用高压无气喷涂方式。
- The merits of airless spray are introduced.The selection principles,methods and parametres of the special nuzzles for the airless spraying process are described. 介绍了无气喷涂的优点及其专用喷嘴的选择依据、方法和参数。
- It is inevitable for the thermal spray coating to avoid porosity due to the working principium of the thermal spray. 摘要热喷涂的工作原理决定了其涂层孔隙是不可避免的。
- If necessary, holes, seams and edges, where painting is difficult, should be given a stripe coating and additional coating with brush prior to airless spraying. 必要时,在难以涂装的孔、缝或边缘处。应在正式喷涂之前进行预涂。
