您要查找的是不是：
- Nanostructured zirconia coatings on stainless steel substrate were prepared by air plasma spraying technology. 利用大气等离子喷涂技术在不锈钢基体上制备了纳米氧化锆涂层。
- Electron beam physical vapor deposition (EB-PVD) and air plasma spray (APS) deposition are now the two most important methods prepared for high temperature coatings. 电子束物理气相沉积和等离子喷涂是目前制备高温涂层的两种最重要方法。
- Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper. 摘要采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池SOFC阳极层。
- Effect of Thermal Treatment on the Grain Growth of Nanostructured YSZ Thermal Barrier Coating Prepared by Air Plasma Spraying 热处理对大气等离子喷涂纳米结构YSZ热障涂层晶粒长大的影响
- air plasma spraying 等离子喷涂
- Keywords solid oxide fuel cell;interconnect;metal alloy;LSM;air plasma spray; 固体氧化物燃料电池;连接板;金属合金;LSM;空气等离子喷涂;
- Membrane electrode assembly of solid oxide fuel cell fabricated by air plasma spray 等离子喷涂制造固体氧化物燃料电池三合一电极
- Principle and characteristic of the plasma spraying were introduced. 介绍了等离子喷涂的原理及特点;
- Nanostructure YPSZ coating was fabricated by plasma spraying technology. 研究采用等离子体喷涂制备纳米结构YPSZ涂层。
- Results:The results show that plasma spraying can create the coatihg with finer microstructure,lower impurities content,less air hole and higher bonding strength than flame spraying. 结果:等离子喷涂与火焰喷涂相比具有涂层组织致密,杂质含量和气孔率低、涂层与基体间结合强度较高等优点。
- A metal ceramics coat shall be lined on the inner cavity of valve by adopting plasma spraying technique. 采用等离子弧喷涂工艺,在阀门内腔衬一层金属陶瓷涂层,可延长阀门的使用时间。
- The test verifies that all technical performances of the inverter can meet the demand of plasma spraying process. 试验研究表明：该逆变器的各项性能指标可满足等离子喷涂工艺的要求。
- It was verified by ESCA spectra that the PA film which was treated by air plasma is linked to O and N atoms. ESCA谱证实了在空气等离子体处理后的PA膜表面上接入了O和N原子。
- It also points out the matters needed to study ,and exhibits the bright applied future of plasma spraying. 并提出需要研究的问题,展示了等离子喷涂更加广阔的应用前景。
- The capability of the nanostructure cermet coating and principle of plasma spraying are introduced in detail. 详细介绍了等离子喷涂的原理及纳米结构金属陶瓷涂层的性能。
- The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply. 对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。
- It indicates that dielectric barrier discharge air plasma has degradation effect on polymers. 介质阻挡放电空气等离子体能对有机聚合物产生降解作用。
- W/TiC coating is successfully deposited by plasma spraying technique on carbon-carbon composites and the ablation-resistant is studied. 采用等离子喷涂方法在碳/碳复合材料上制备了钨/碳化钛复合涂层并进行了涂层抗烧蚀性能研究。
- The plasma spraying experiments were carried out using various argon-nitrogen volume mixture ratios,and the corresponding coatings were obtained. 采用了不同的氩氮体积混合比进行等离子喷涂实验,并获得相应条件下的涂层。
- Results showed that Ta coating with dense structure and uniform thickness could obtain by the optimized plasma spraying process. 结果表明，采用优化的等离子喷涂工艺参数，可以制取组织致密、厚度均匀的钽涂层；
