您要查找的是不是：
- Flow Field Analysis and Structure Optimization of PEM Fuel Cell Air Inlet Manifold PEM燃料电池进气箱的流场分析与结构优化
- air inlet manifold gasket 进气支管垫片
- air inlet manifold 进气歧管
- RAM AIR INLET MECHANICAL LINKAGE. 冲压空气进口机械连杆机构。
- Remove the air inlet hose from the throttle body and air cleaner. 从节流阀体和空气滤清器上拆下气流入口软管。
- An expansion of unburnt gases in the exhaust system or a premature explosion in a cylinder or inlet manifold. 在排气系统未燃烧尽的气体的爆炸,或者在汽缸或进气管道的过早爆炸。
- Turn off supply pressure and observe float drop to open air inlet. 关闭供应压力,观察浮子下降,因此开启空气进口。
- In order to producte qualified inlet manifold casting, top gating system with lip riser and shell core made of precoated sand is used. 为了获得合格的进气歧管铸件，采用压边顶铸浇注系统和覆膜砂壳芯制作工艺。
- Check found birdstrike on radome and R engine air inlet. 雷达罩和右发进气道口有鸟击痕迹。
- A new casting technology for inlet manifold in tilt casting machine for gravity die casting was described. 介绍了在可倾式金属型浇注机上制造进气歧管的铸造新工艺。
- Air inlet throttle valve with pneumatic actuator and positioner. 空气进气节流调节阀：带有气动定位和执行机构。
- Connect the air inlet hose to the throttle body and the air cleaner. 将空气入口软管接至节流阀体和空气滤清器。
- Slowly open vent needle valve just as air inlet opens. Record differential pressure. 当空气进口开启时,慢慢开启排气针形阀。记录压差。
- Slowly open needle valve "C" bypass (yellow) just as air inlet opens. Record differential pressure. 正当空气进口打开时，慢慢开启针形阀“C”旁路（黄）。记录压差。
- Overpressure to the Inlet Manifold 进口多头导管超压
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal. 供水与空气的隔离是通过采用隔膜密封的方法实现的。
- Next, let's make the simple panel under the air inlet that we can find on the side. 接下来，让我们作一个简单小组根据空气进说，我们能够找到对的一面。
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal . 水供应与空气进口的分离通过隔膜密封的方法实现。
- Requirement: Air inlet must start to open when supply pressure is 1.0 PSI or above. Air inlet must be fully open when supply pressure is atmospheric. 要求：当供应压力达到或超过1.;0PSI时，空气进口必须开始打开。当供应压力达到大气压力时，空气进口必须完全打开。
- The valve shall be constructed with a molded diaphragm separating the air inlet from the potable water supply to prevent spillage. 这种阀门应该配置一个模压隔膜，将空气进口与饮用水供水管道隔离开来，以防止泄漏或溢出。
