您要查找的是不是:
- Brass forging tee air relief valve 黄铜锻压三通放气阀
- Technical Capacity and Choice of Air Relief Valve 排气阀的技术性能及选择
- Several Questions about the Air Relief Valve Design of Long Distance Water Delivery along the Pipe Line 长距离输水工程中管路进排气设计的几个问题
- Hang the Air Gap Drain on the body of the relief valve (Fig. 2). 将气隙排放装置悬挂在安全阀阀体上(图2)。
- air relief valve 放气阀
- Remove the elbows from the relief valve base. 从安全阀底座拆卸弯头。
- Clean or replace the relief valve seat. 清洗或更换安全阀阀座。
- Damage or fouled relief valve seat. 安全阀阀座损坏或受到污染。
- Damaged or fouled relief valve seat. 安全阀阀座受到损坏或污染。
- Relief valve must be piped to a suitable drain. 安全阀必须配置通向适当排泄口的排泄管道。
- Install relief valve cover nut and tighten. 安装安全阀阀盖螺母,并加以紧固。
- To assemble the Relief Valve Assembly have a screwdriver ready. 准备好组装安全阀总成的螺丝刀。
- Place the relief valve seat back into the chamber bore. 将安全阀阀座放回到镗孔内。
- Remove the relief valve hose from fitting below inlet ball valve. 从进口球阀下面连接件拆卸安全阀软管。
- Slide the diaphragm assembly into the relief valve seat. 将隔膜总成滑进到安全阀阀座内。
- Reinstall the elbow into the base of the relief valve to hold the Air Gap Drain in place. 将弯头安装在安全阀的底座,将气隙排放装置固定住。
- The installation of a Watts air gap with the drain line terminating above a floor drain will handle any normal discharge or nuisance spitting through the relief valve. 安装带着排放管道的美国瓦茨气隙,其排放管道的终端位于地漏的上方,用于处理通过安全阀的任何正常排放或有害喷溅。
- No valve is to be placed between the relief valve and tank. 在热水器储水罐和安全阀之间不需要安装任何阀门。
- Electrolysis of relief valve seat or first check seats. 安全阀阀座或第一止回阀阀座被电解或电蚀。
- Electrolysis or relief valve seat or first check seats. 安全阀阀座或第一止回阀阀座产生电蚀。