您要查找的是不是：
- Electron beam physical vapor deposition (EB-PVD) and air plasma spray (APS) deposition are now the two most important methods prepared for high temperature coatings. 电子束物理气相沉积和等离子喷涂是目前制备高温涂层的两种最重要方法。
- Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper. 摘要采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池SOFC阳极层。
- Nanostructured zirconia coatings on stainless steel substrate were prepared by air plasma spraying technology. 利用大气等离子喷涂技术在不锈钢基体上制备了纳米氧化锆涂层。
- Keywords solid oxide fuel cell;interconnect;metal alloy;LSM;air plasma spray; 固体氧化物燃料电池;连接板;金属合金;LSM;空气等离子喷涂;
- Membrane electrode assembly of solid oxide fuel cell fabricated by air plasma spray 等离子喷涂制造固体氧化物燃料电池三合一电极
- air plasma spray 大气等离子喷涂
- Effect of Thermal Treatment on the Grain Growth of Nanostructured YSZ Thermal Barrier Coating Prepared by Air Plasma Spraying 热处理对大气等离子喷涂纳米结构YSZ热障涂层晶粒长大的影响
- The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation. 通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
- PS304 is a composite plasma spray solid lubricant coating used in high speed,high temperature Oil-Free Turbomachinery. PS304是应用于高速、高温无油透平机械的一种复合等离子喷涂固体润滑镀层。
- Titanium coatings have been deposited onto 317L stainless steel plate by low pressure plasma spray(LPPS)process. 采用低压等离子喷涂工艺，在317L不锈钢质接骨板上喷涂了钛涂层，制备出钛涂层的接骨板。
- It was verified by ESCA spectra that the PA film which was treated by air plasma is linked to O and N atoms. ESCA谱证实了在空气等离子体处理后的PA膜表面上接入了O和N原子。
- The special processes include vacuum brazing, vacuum furnaces, plasma spray, rubber application, NDT, MPI, FPI, EDM etc. 普惠公司是世界三大发动机生产公司之一占有世界民用发动机将近一半的市场份额。
- air plasma spraying 等离子喷涂
- Experimental results provide the process monitoring of coating temperature the prewarning of coating damage and the focusing scope in plasma spray. 实验结果为等离子熔射过程中皮膜温度监控确定了皮膜破坏预警信息和核心目标监控区域。
- The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply. 对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。
- The method of plasma spray coating was used to prepare the FeS coatings on 1045 steel substrate with three thicknesses respectively. 利用等离子喷涂在45钢表面制备了三种厚度不同的硫化亚铁固体润滑层。
- It indicates that dielectric barrier discharge air plasma has degradation effect on polymers. 介质阻挡放电空气等离子体能对有机聚合物产生降解作用。
- A lot of harmful fume produced by air plasma cutting has a quite different distribution form, which determine the design for dust removing device. 空气等离子切割时将产生大量对人体有害的烟尘,其烟尘分布的特点决定了降尘装置的设计。
- Effect of Mn and Ti precipitates on the hot ductility of low carbon and ultra low carbon steels High Hardness Alumina Coating Prepared by Low Power Plasma Spray. 超低碳钢的高温强度节能、高效率等离子喷涂设备的开发。
- The arc cutting technique of air plasma water re-compressed won the second prize of National Scientific and Technological Progress Award. 科研项目空气等离子水再压缩弧切割技术获国家科技进步二等奖。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
