您要查找的是不是：
- As a novel modular cooling apparatus, adsorption cooling tube and its application study is an important side of solid adsorption refrigeration research field. 吸附制冷技术目前已成为国际上普遍关注的一个学术方向。
- REFRIGERATING CHARACTERISTICS OF SOLID ADSORPTION COOLING TUBE 固体吸附式冷管的制冷性能
- Research Evolution on Solid Adsorption Cooling Tube and Its Application 固体吸附式冷管及其应用研究进展
- Refrigerating Characteristics of the Adsorption Cooling Tube With Different refrigerant charging 制冷剂充灌量对吸附式制冷管的制冷特性的影响
- Study on Cycle Characteristics of a Solid Adsorption Cooling Tube Driven by Waste Heat 余热驱动吸附式冷管的循环特性研究
- Study on influencing factors of the minimum evaporating temperature for a novel adsorption cooling tube 新型吸附式冷管的最低制冷温度影响因素研究
- Experimental study on cycle process of an adsorption cooling tube under various water-charging conditions 几种典型注水量下吸附式冷管的工作特性实验研究
- RUNNING CHARACTERISTICS OF ADSORPTION COOLING TUBE AIR-CONDITIONER POWERED BY WASTE HEAT OF ENGINEERING TRUCKS 工程机械余热驱动冷管型吸附空调的运行特性
- Numerical Simulation and Experimental Study of the Adsorption Cooling of Solar Cooling Tube in Nighttime 太阳能冷管晚间吸附制冷的数值模拟与实验
- adsorption cooling tube 吸附冷管
- At present adsorption cooling technology has become a learning aspect in which prevalent attentions are pain internationally. 它对节约能源和保护环境均具有重要意义。
- Aiming at the refrigeration of the fisher, we use exhausted heat of the fisher's diesel engine as the power to drive the cooling tube. 针对渔船出海捕鱼冷藏问题,利用渔船的柴油发动机的余热,采用余热冷管进行制冷来提供冷冻保鲜需要的冷量。
- Connect the blower motor cooling tube to the nipple on the blower motor housing. 连接吹风机马达冷却管到吹风机马达罩上的短管。
- The cooling tube retracted the rod, thus opening the draft and increasing the fire. 而火一小下来，冷却了的试管就会让杠杆回收从而打开风口让火变大。
- Compared with ones by cooling slope method,the grain in the semi-solid slurry exhibits finer and more roundness by damper cooling tube in the condi... 与冷却斜槽法相比,同一工艺参数下阻尼冷却管法制备的铸件晶粒更为细小和圆整。
- Aiming at the refrigeration of the fisher,we use exhausted heat of the fisher s diesel engine as the power to drive the cooling tube. 针对渔船出海捕鱼冷藏问题,利用渔船的柴油发动机的余热,采用余热冷管进行制冷来提供冷冻保鲜需要的冷量。
- This conclusion is some value to decrease thermal stress of cooling tubes and protect the sealing. 本文的结论对于减小冷却管热应力，防止凝汽器密封破坏，具有参考价值。
- Abstract: The deposition characteristics of diesel engine particles under the effect of thermophoresis force in cooling tube have been studied by the method of parameter analysis in this paper. 摘要：对热泳力作用下柴油机微粒在冷却通道中的沉降规律进行了研究。
- Research on the failure reasons of the cooling tube were carried out by means of macroexamination, thickness measurement, X ray diffraction, optical microscopy and chemical analysis. 采用宏、微观分析、化学成分分析等手段,对冷却水管的腐蚀穿孔进行了失效分析。
- WIT has graduated beyond handles, brake pedals, and automotive cooling tubes into shipping crates, toys, furniture, and large waste bins. 水辅注射已经从把柄、闸踏板、汽车冷却道这些简单零件过度到能制造海运包装箱、玩具、家具、大垃圾箱这些产品。
