您要查找的是不是：
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- adjusting screw nut 调节螺母
- A screw nut is needed. Please fetch one for me. 差一个螺帽，你再帮我拿一个来。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- To replace seat disc; shut off supply, loosen nut (51) and back off adjusting screw (53) remove spring cage (3), spring (52) and washer (62). 要更换阀座阀瓣，先关闭供应管道，松开螺母(51)，拧下调节螺丝(53)，拆卸弹簧笼(3)、弹簧(52)和垫圈(62)。
- To readjust reduced pressures, loosen check nut and turn adjusting screw clockwise to raise reduced pressure and counterclockwise to lower reduced pressure. 如果要重新调节压力，则松开锁进螺母，顺时针旋转调节螺丝，提高减压；逆时针旋转，降低减压。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- Supply:grow the plastics hand screw nut, adapting each spare part to regulate to use fixedly, can come to diagram to order to make! 供应:名种塑料手旋螺丝螺帽,适应各器件调节固定用,可来图订制!
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- BG type offers a unique “U “shaped guide rail and slide block which provides multiple functions of a guide block and a ball screw nut combined into a single unit. BG系列模组是一个独特的"U"形传动导轨和滑块提供多种功能固定座和滚珠丝杠螺母合并成一个单一的单位。
- When the vertical turret decline, due to friction hinder its decline, the screw on helical screw nut under the physiognomy contact screw nut in the space below. 当垂直刀架下降时，由于摩擦力阻碍其下降，使丝杆的上螺旋面螺母的下螺旋面相接触，丝杆螺母的间隙在下面。
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝，拔出或插入连接杆进行调整。
- Two adjusting screws harmonise the guns with the sight. 有两个调节钮来校准武器和瞄准具。
- If you rotate the spoolcounterclockwise,the spool retreats.Thus the hydrophobic volume increases and the hydrophobic temperature rises.At last drivetightly the screw nut after adjustment. 逆时针旋转，阀芯后退，疏水量增大，疏水温度上升，调整后将锁紧螺母拧紧。
- To replace seat/stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/阀杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
