您要查找的是不是:
- Steel cord conveyor belts--Adhesion strength test of the cover to the core layer 钢丝绳芯输送带覆盖层与带芯层粘合强度试验方法
- adhesion strength test 粘着强度试验
- Standard for adhesive strength test of tapestry brick for building engineerings 建筑工程饰面砖粘结强度检验标准
- The "Scotch tape test" was designed to measure the adhesion strength of the metal coating to the PET fabric. 采用自主设计的“透明胶带法”测量金属与织物纤维的结合力。
- Concrete bending tensile strength test machine. 混凝土抗折机。
- Standard forms for concrete bending tensile strength test cube. 混凝土抗折试模。
- Standard forms for concrete compressive strength test cube. 混凝土抗压试模。
- Standard forms for grout compressive strength test cube. 砂浆试模。
- The diffusion of Ti, C, W of the substrate into the film improved the adhesion strength of the interface. 基体中的元素在薄膜中有明显的扩散,有助于提高界面结合强度。
- Interfacial adhesion strength of composite is characterized by the methods of torsional braid analysis. 使用扭辫分析对复合材料界面粘合强度进行了表征。
- Rubber adhesive packing tape, gook adhesion strength, water and cold proof. 感压性牛皮纸胶带,粘性佳,防水及耐候性优良,主要用于纸箱包装。
- For flexural strength test of cement specimen and other nonmetallic material. 用作水泥或其它非金属脆性材料试块的抗折强度测定。
- Pyrogenic silica, configuration controller and silane coupling agent influence the adhesion strength to some extent. 气相白炭黑、结构控制剂和硅烷偶联剂对粘接抗拉强度都有不同程度的贡献。
- Higher adhesion strength was achieved by adding the treated additive LW with CTAB and silane coupling agent KH550. 当采用硅烷偶联剂KH550、十六烷基溴化胺对LW表面进行处理;粘合性能可以进一步提高;并且硅烷偶联剂KH550处理LW的效果更好.
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- SEM photos reveals the combination of ATPU and OMMT enhances the interphase adhesion strength between polymer matrix and glass fiber. 丙烯酸酯封端聚氨酯与改性蒙脱土的复合还提高了聚合物基体与玻璃纤维的界面粘合强度。
- Studies indicated that cohesion increased with the increase of crosslinking agent from 0.2% to 1.2%, but adhesion strength and tack decreased. 研究表明;随着交联剂用量从0.;2%25增大至1
- A series of Aluminium silicate gunning refractories and its properties, such as thermal shock resistance, adhesion strength, were measured. 配制系列硅酸铝质喷补料并检测其抗热震性及喷补附着性能等。
- The results show that the adhesion strength of UHSPE fiber/epoxy resin can be greatly improved via corona discharge su... 结果表明,经电晕法表面处理后的UHSPE纤维单丝与环氧树脂的界面粘结强度有了很大的提高。
- T. Arai , H. Fujita , M. Watanabe, “Evaluation of adhesion strength of thin hard coatings”, Thin Solid Films, 154 (1987) 391. 吴明勋,“添加银或钨对氮化铬薄膜磨润性能之影响”,国立成功大学机械工程学系,中华民国92年。