您要查找的是不是：
- The interface of the diamond film and the active filler metal was observed by scanning electron microscope - energy dispersive spectroscopy and X-ray to dislcose the bonding medanism mechanism. 用扫描电镜、电子探针及X射线衍射区研究了金刚石膜与活性钎料界面,揭示了钎焊界面的形成机理。
- nickel-based active filler metal 镍基活性钎料
- Cu-based active filler metal Cu基活性钎料
- active filler metal 活性钎料
- Ag-Cu-Ti active filler metal Ag-Cu-Ti活性合金焊料
- Ag-Ti active filler metal Ag-Ti活性钎料
- BRAZING OF Si_3N_4 CERAMIC USING RAPIDLY SOLIDIFIED Al-BASED ACTIVE FILLER METALS 用急冷Al基活性钎料钎焊Si_3N_4陶瓷的研究
- Investigation of Brazing Mechamism of Ceramics Si_3N_4 with Activated Filler Metal 活性钎料钎接Si_3N_4陶瓷的机理研究
- Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire. 航空航天系列.;金基合金AU-B40001
- They are readily weldable, in most cases, with or without filler metal. 多数此种合金可焊（不论加或不加焊料金属）。
- It is concluded that the fine AP can act as active filler in the polymer matrix and enhance the matrix properties. 研究得知,细AP粒子在聚合物基体中起有效的填充剂作用,并增强机体的性能。
- However, for attaching nonpressure parts to pressure parts, the filler metal chemistry shall match the nominal chemistry of the pressure part. 但将非受压元件焊接受压元件时所用的填充金属，应与受压元件的标称化学组成相配。
- An appropriate (amount) of inert filler SiC (5%, mass fraction) or active filler nano-Al/Si powder is good for the joining of C_f/SiC composites. 适当加入惰性填料SiC(5%25,质量分数)或活性填料(纳米Al、Si粉)可以大幅度提高硅树脂对Cf/SiC复合材料的连接性能。
- Influence of Sn and In in silver filler metal on spreadability and joint strength is studied. 研究了银基钎料中元素锡、铟对钎料铺展性能和接头的影响,分析了钎料的显微组织和锡、铟在钎料中的作用机理。
- This paper concisely introduced the effects of the choice of curing agent,the flexibilizer quality and the active filler on the mechanical properties of the adhesive. 简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
- Cold lap is a condition where the weld filler metal does not properly fuse with the base metal or the previous weld pass material (interpass cold lap). 冷隔？（未熔合）由于熔敷金属没有很好的与母材熔合或没与前道焊缝熔合（层间未熔合）。
- Abstract: In this paper, the mechanism of electrochemistry corrosion of the tractor radiator brazed with brass (H90 and H70) and Sn-Pb filler metal was investigated. 文摘:研究了采用黄铜(H90、H70)和锡铅钎料钎焊而成的拖拉机水箱电化学腐蚀机理。
- It adopt advanced jointing technique when joint the valve and the copper tube，it brazing filler metal well，without pore and overheating，and has a smooth make and break . 阀体与铜管的连接，采用先进的焊接工艺，钎料到位，无气孔和过烧现象，开闭灵活。
- The reaction pyrolysis mechanism of polycarbosilane (PCS) precursor systems with active filler Al and inert filler SiC was investigated by TG-DTA, XRD and ELEM of the pyrolysis products at different temperatures under a flowing nitrogen stream. 以热重 -差热 (TG -DTA)、流动氮气气氛中不同裂解温度下产物的X射线衍射 (XRD)和元素线扫描 (ELEM)方法研究了含活性填料Al,惰性填料SiC的聚碳硅烷 (PCS)先驱体的裂解 -反应机理。
