您要查找的是不是：
- Copper foil tape with acrylic adhesive for specialty EMI/RFI shielding and protection. 铜箔，无导电性压克力胶系，适合用于EMI/RFI遮蔽，可焊锡。
- Packing tapes are made with BOPP film and coated with emulsion based acrylic adhesive . they are cha... 发布者：张慧所在地：广东东莞市行业：包装职位：外销员工作年限：
- Heat-resistant acrylic adhesives. 耐热的丙烯酸粘接剂
- BOPP film coated with acrylic adhesive, printable, excellent weather resistance, assorted colors to be used as carton package tape. 采用双轴延伸OPP薄膜及压克力胶抗张力强，耐老化性及耐磨性耐候性均佳，用于包装及封箱，并可印刷。
- The CNC PRO KPC 93 is coated with a modified acrylic adhesive for protection of PMMA &PC plates / lens during CNC routing process. 涂覆有一层改良型丙烯酸粘接剂，可对CNC绕送过程中的PMMA和PC板/镜片给于进行保护。
- This is a topcoated thermal transfer printable white polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with a semi bleached kraft release liner. 涂层为适用于热转移打印技术的白色聚酯标签材料，内涂永久丙烯酸基压敏胶，底层是半漂白牛皮离型纸。
- The process conditions of water solubte pressure sensing acrylic adhesive preparation were studied,and optimum conditions were obtained.The product is featured of safe,less pollution and low cost. 在实验的基础上,研制了水溶型的丙烯酸类压敏粘合剂,并确定了工艺条件。该产品具有安全性好,环境污染小,成本低等优点。
- The film features an A-208 permanent pressure-sensitive acrylic adhesive that provides “water-clear” wet-out on glass and polyester containers, and resists hazing during pasteurization and chilling. 影片功能的A - 208常任理事国的压力敏感的丙烯酸酯胶粘剂，提供“水明确的”湿了玻璃和聚酯容器，并拒绝在巴氏杀菌侮辱和心寒。
- Buy Water Based Acrylic Adhesive Glue 土耳其求购胶
- Study on Acrylic Adhesive Modified with Silicone 有机硅改性丙烯酸酯胶粘剂的研究
- NBR toughening two-component acrylic adhesive 用NBR增韧双组分丙烯酸酯粘合剂
- high-temperature resisting acrylic adhesive 耐温丙烯酸酯胶粘剂
- This paper discussed how the different groups, such as -CN,-COOH,-CONH2，-C6H5 and -OH ect.influencing the bonding property of acrylic adhesives. 介绍了通过共聚分别把-CN、-COOH、-CONH2、-C6H5、-OH等基团引入丙烯酸酯大分子链中，研究了这些基团分别对丙烯酸酯胶粘剂剥离强度和内聚强度的影响。
- The influences of the dosage of HEA (or HPA,GMA)and ratio of component A and B on the capability of two-component acrylate adhesive were studied. 研究了自交联丙烯酸酯的用量及A组分与B组分的配比对双组分丙烯酸酯胶粘剂性能的影响。
- The two-component acrylate adhesive is prepared by solution polymerization with polyurethane101-B component and mixed monomer which is consisted of 2-EHA,vinyl acetate,acrylic acid and HEA. 采用溶液聚合的方法,以丙烯酸羟乙酯、乙酸乙烯酯、丙烯酸和丙烯酸异辛酯的混合单体及聚氨酯101-乙组分为原料,合成了双组分溶液型丙烯酸酯胶黏剂。
- The application of acrylate adhesive in FCCL was researched.And the FCCL showed good flame resistance,excellent solder resistance,high peeling strength and chemical resistance. 并研究了不同配比的丙烯酸酯胶粘剂制得的挠性覆铜板的阻燃性能、力学性能和热学性能。
- The two-compontent acrylate adhesive modified with different AN content of NBR was studied. The results indicated that the transparence increased with the AN content increasing. 研究了不同丙烯腈含量的丁腈橡胶(NBR)对双组份丙烯酸酯胶粘剂进行改性,结果表明随着丙烯腈含量提高,固化物透明度增加。
- You need a strong adhesive to bond wood to metal. 需要强力胶才能把木料粘在金属上。
- Research of room temperature rapid curing aerobic acrylic Adhesive 室温快固需氧丙烯酸酯胶粘剂的研究
- A paint containing acrylic resin. 丙烯酸树脂漆含丙烯酸树脂的涂料
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
