您要查找的是不是:
- Variables parameters the degree of grafting(DG),such as UV irradiation time and the(concen)-(trations) of the acrylic acid monomer and p. 在均相溶液体系下,运用紫外光辐射引发合成了聚砜与丙烯酸的接枝共聚物。
- Hydroxyl acrylic acid resin(HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution. 采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR),详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。
- A branched fluorine - containing acrylic resin has been developed through solution polymerization at normal pressure with liquid fluorine - containing acrylic acid monomer and acrylate monomers. 将液态含氟丙烯酸单体与丙烯酸酯类单体采用常压溶液聚合工艺,合成了支链含氟的丙烯酸树脂。
- Study of Improving the Hydroscopicity of Acrylic Acid Monomer Grafting Polypropylene Nonwoven Fabric 丙烯酸系单体接枝聚丙烯非织造布改善吸湿性的研究
- acrylic acid monomer 丙烯酸单体
- Amphoteric monomer is prepared with acrylic acid,dimethylamine,and chloro-ethanol by Mannich reaction. 以丙烯酸、二甲胺、环氧氯丙烷为原料,通过曼尼希反应制得两性离子单体。
- SHANGHAI HUAYI ACRYLIC ACID CO., LTD. 上海华谊丙烯酸有限公司。
- Effect of component dosage, temperature,acrylic acid neutralization as well as the concentration of monomer on Mw of polyacrylate sodium were studied. 采用水溶液聚合,使用了由氧化还原引发体系和偶氮类引发剂组成的一种复合引发体系制备高分子量聚丙烯酸钠。
- Latex particles were obtained by soapless emuls ion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presen ce of functional monomer acrylic acid (AA) . 以苯乙烯、甲基丙烯酸甲酯为主单体,丙烯酸为功能单体合成了三元无皂乳液共聚胶粒。
- A swellable polymer water shutoff agent was prepared with acrylic acid,acrylamide,organic crosslinker (MBAM)and functional ion monomer(D/S)as main materials. 针对高温高盐大孔道地层,以丙烯酸、丙烯酰胺、有机交联剂MBAM和功能性离子单体D/S为主要原料,制备了吸水膨胀型堵水剂。
- A kind of molecular imprinted polymer was prepared using cefalexin as the template molecule, both 2-(trifluoromethyl) acrylic acid and 4-vinylpyridine as functional monomer. 采用分子模板技术合成了以头孢氨苄为模板分子,以三氟甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子模板聚合物。
- The bonding performance of chloroprene rubber (CR)/methyl methyacrylate(MMA) graft adhesive is enhanced by means of adding the second monomer,acrylic acid(AA). 在氯丁橡胶 (CR)和甲基丙烯酸甲酯 (MMA)接枝胶中 ,通过加入第二单体丙烯酸 (AA) ,进一步提高CR/MMA接枝胶的粘接性能。
- Nanon hybrid materials MMT/PMMA and MMT/PBA/PMMA were prepared by emulsion polymerization of acrylic acid ester monomer with sodium dodecylbenzenesulfonate (SDBS) and Na-montmorillonite(Na-MMT). 利用十二烷基苯磺酸钠,钠基蒙脱土和丙烯酸酯类单体通过乳液聚合的方法制备了MMT/PMMA和MMT/PBA/PMMA纳米杂化材料。
- Carboxylated Nitrile( XNBR) is a terpolymer of acrylonitrile, butadiene and an organic acid monomer. 羧化丁腈橡胶是由含羧基单体和丁二烯、丙稀腈三元共聚制得得。
- A water - plugging and profile modification agent was prepared using acrylamide and cationic monomer as main materials, and adding acrylic acid, crosslinking agent and other additives. 以丙烯酰胺、阳离子单体为主要原料,加入丙烯酸、交联剂及其他添加剂,制得抗盐型调堵剂。
- The influences of emulsifier,initiator,acid monomer level and charging modes on the properties of emulsion were discussed. 讨论了诸如乳化剂、引发剂、酸性单体用量、加料方式等乳液聚合因素对乳液性能的影响。
- A copolymer has been synthesized from acrylic acid and maleic anhydride. 以丙烯酸和马来酸酐为原料合成出了一种共聚物。
- Carboxyethyl (phenyl) phosphinic acid with the yield of 69.2% was synthesized from phosphorous trichloride, benzene, sodium chloride and acrylic acid. 以三氯化磷、苯、三氯化铝、氯化钠、丙烯酸为原料合成了阻燃剂2-羧乙基苯基次磷酸,收率69.;2%25。
- And 2-10% acrylic acid, methacrylic acid (III), or itaconic acid, or their mixts. 2-10%25的丙烯酸、甲基丙烯酸(III)或衣康酸或它们的混合物。
- Epoxy arcylate was synthesized when epoxy resin and acrylic acid were used as raw materials. 摘要以环氧树脂和丙烯酸为基本原料,合成环氧丙烯酸酯并进行了表征。