您要查找的是不是:
- Abrasive resistance See Abrasion resistance. 耐摩擦性参阅上文。
- The abrasive resistance of as-cast martensitic high chromium cast iron is 3 times more than that of Ni-hard cast iron. 铸态马氏体高铬铸铁的耐磨性是镍硬铸铁的3倍以上。
- The XNBR vulcanizated with sulphur/metal oxide vulcanization system had better abrasive resistance and compression set. 用硫黄/金属氧化物硫化体系所得到的XNBR硫化胶的耐磨性、压缩永久变形较好;
- Rub-proof ink: Ink with good abrasion resistance . 耐擦墨:不容易磨损的油墨。
- Features: with the feature of abrasive resistance corrosion resistance good hardness and dry lubricity it is beautiful and gorgeous. 主要特点:膜层具有耐磨、耐蚀、硬度高、干润滑性,美观、华丽。
- Good impact and abrasion resistance. 耐磨性,耐冲击性良好。
- Good weather, seawater and abrasion resistance. 良好的耐侯性、耐海水性、耐磨性。
- First floats the towel merit hygroscopicity good, the abrasive resistance good, soft, is easy to clean, also cannot discoloration. 前漂毛巾优点吸水性佳、耐用度佳、柔软、易清洗、且不会褪色。
- Adopting imported ABS plastics for shell,spaying imported abrasive resistance alcohol-proof paint,makes shell friction-resistance. 外壳采用进口ABS全原料塑胶,喷涂进口原装耐磨防酒精油漆,使外壳耐磨擦.
- Used to various liners requiring thermal shock resistance and abrasive resistance,Its service time is 2-5 times as long as that of common castables. 用于各种内衬要求抗热震、抗冲击、耐磨损部位是一般浇注料使用寿命的2-5倍。
- The said raw lacquer possesses good antiweatherability, ageing resistance, resistance to ultraviolet radiation, abrasive resistance and adhesive force. 本发明制备所得的生漆具有良好的耐候性能,在抗老化,尤其在抗紫外线引起的光老化方面效果显著;
- The experiment and research results show that the resistance to impact and abrasive resistance of PSCU are better than that of sulphur coated urea (SCU). 试验结果表明,PSCU在抗冲击性和耐磨性上均明显优于硫包尿素(简称SCU);
- The resultshows that after the laser hardening the abrasive resistance of 45 steel in the thermal refing state isthree times higher than that in the annealed state. 研究结果表明,45钢激光淬火后,原始组织为调质态的耐磨性比退火态的耐磨性提高三倍。
- Yttrium contained hardfacing electrode with good process properties were made and the structure,hardness and abrasive resistance in hardfacing layer were studied. 研制出一种工艺性能良好的含稀土钇的堆焊焊条,对其堆焊层显微组织结构、硬度、耐磨性进行了较系统的试验研究。
- By analying a great deal of experiment data,the relation is discussed between V's quality and change of high Cr iron performance(hardness?impact toughness? abrasive resistance). 通过大量的实验数据分析,研究了钒铁变质处理对高铬铸铁性能的影响,以及不同钒含量时碳化物形态、数量对高铬铸铁硬度、冲击韧度和耐磨性的影响。
- Good solvent and abrasion resistance, medium flexibility. 优良的耐溶剂性、耐磨性,中等的柔韧性。
- Polypropylene multifilament ropes has superior abrasion resistance. 湿态时的强度和伸长与标准态时基本一致。
- The Type A Valve's abrasion resistance is unmatched. 这种夹管阀的抗磨损性能是无可匹敌的。
- Through a series of tests,the effect of heattreatment on the structure and properties of abrasive resistent mottled ductile iron was investigated. 通过一系列试验,研究了热处理对麻口耐磨球铁组织和性能的影响。
- A composite coating was prepared by oxygen and acetylene thermal spray welding using the powders composed of Ni-based powder and nano-Al 2O 3,sub-micron-Al 2O 3,micron-Al 2O 3.The effects of the load and time on abrasive resistance were studiesd. 将微米级、亚微米级、纳米级 3种粒度的Al2 O3 与Ni基自熔性合金制成复合粉末后 ,用氧乙炔焰热喷焊工艺制备出复合涂层 ,研究了载荷大小、磨损时间等对涂层耐磨粒磨损性能的影响。