您要查找的是不是:
- abrasion resisting alloy 耐热合金
- Hard surfacing of abrasion resisting mechanical parts. 堆焊要求耐磨的机械部件。
- abrasion resistance alloy [机] 耐磨合金
- abrasion resistant alloy 耐磨合金
- Rub-proof ink: Ink with good abrasion resistance . 耐擦墨:不容易磨损的油墨。
- Good impact and abrasion resistance. 耐磨性,耐冲击性良好。
- Good weather, seawater and abrasion resistance. 良好的耐侯性、耐海水性、耐磨性。
- The high hardness and toughness in the abrasion resisting steel after quenching and tempering two times is due to bainite formation in the l... 在二次加热淬火回火中出现高硬度、高韧性值,是因为衬板淬火过程中在具备贝氏体生成的冷却速度下生成了贝氏体组织。
- They put forward the optimum tempering process for non-cabide bainite abrasion resisting steel, in addition,introduced the applied effect of ... 提出了适合无碳化物贝氏体耐磨钢的最佳回火工艺,并介绍了无碳化物贝氏体钢的工况及应用结果。
- The valve body and internals are made from high-temperature alloy which features high-temperature abrasion resistance and long service life. 阀体和内件由高温合金钢制造,其特点是高温下耐磨和阀体寿命长。
- The file hard (60RC) high strength aluminum alloy tube provides a smooth corrosion free sealing surface and excellent abrasion resistance. 文件的硬(60RC)高强度铝合金管提供了一个平稳无腐蚀密封面和良好的耐磨性。
- The author developed a new type composite hammer, of which the wear part was made from high CrMn abrasion resisting cast iron and handle was made of low C steel. 研制了一种新型复合锤头磨损部分用铸态高铬锰耐磨铸铁,锤柄用普通低碳钢。
- Good solvent and abrasion resistance, medium flexibility. 优良的耐溶剂性、耐磨性,中等的柔韧性。
- Polypropylene multifilament ropes has superior abrasion resistance. 湿态时的强度和伸长与标准态时基本一致。
- The Type A Valve's abrasion resistance is unmatched. 这种夹管阀的抗磨损性能是无可匹敌的。
- Abrasive resistance See Abrasion resistance. 耐摩擦性参阅上文。
- Easily wearing position of draught fan case surface,made from A 3 steel,is forced to take build-up welding process of GTC wear resisting alloy,and the service life of it is increased by a factor of 9. 采用GTC耐磨合金堆焊工艺,表面强化济钢焦化厂A3钢引风机外壳易磨损部位,使用寿命提高8倍以上。
- Abstract The comprehensive mechanical properties of the heat shears were analyzed and the microstructures and properties of the surfacing high wear resisting alloy layer were studied. 分析了热剪刃的综合力学性能要求,并对表面堆焊高耐磨合金层的显微组织和性能进行了研究。
- Results show that 602RE alloy has favorable mechanical and physical properties. It is a material possessing excellent properties of high temperature oxidation and abrasion resistance. 结果表明,该合金具有良好的力学和物理性能,是一种性能优良的抗高温氧化磨蚀材料。
- High boron alloy steel containing rare earth, titanium and nitrogen is used to produce the crusher hammer, its abrasion resistance is 220% - 250% higher than that of high manganese steel. 含稀土 -钛-氮的高硼合金钢用于制造破碎机锤头,使用安全可靠,耐磨性比高锰钢提高220%25-250%25,且生产成本相当。