您要查找的是不是：
- The hot dip Zn Ni alloy coating provides good anticorrosion performance. Two kinds of materials, Q235 and Q345 used for galvanizing Zn and Zn Ni alloy. 对Q2 35和Q345两种材料表面热浸镀纯Zn和Zn Ni合金 ,研究Ni对热镀锌耐蚀性的影响。
- Process for Black Chromating of Zn Ni Alloy Coating 锌镍合金镀层的黑色钝化
- Keywords hot dip Zn Ni alloy coating;hot dip galvanizing;adhesiveness;corrosion resistance; 热浸锌镍合金镀层;热镀锌;粘附性;耐腐蚀性;
- hot dip Zn Ni alloy coating 热浸锌镍合金镀层
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- The white corrosion products on hot dip Zn Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
- The strengthening mechanism of Zn Al Cu pseudo alloy coating and relationship among hardness,aging temperature and time are studied by SEM,XRD,EDX and hardness test. 利用扫描电镜(SEM )、X射线衍射分析 (XRD)、能谱分析 (EDX)和硬度测试等手段 ,对涂层的性能进行了测试 ,分析研究了Zn Al Cu伪合金涂层硬度与时效温度和时效时间的关系 ,并探讨了强化机理。
- The results show that the room temperature yield strength and tensile strength of hot dip 55%Al Zn alloy coating steel are higher than those of low carbon steel (Q235) plates, and its elongation has not reduced. 结果表明 :Q2 35钢板经热浸镀 5 5%25Al Zn合金后的室温屈服强度和抗拉强度均高于Q2 35钢 ,而伸长率没有降低。
- In this paper, the adhesiveness and the corrosion resistance of hot dip Zn 0.1Ni alloy coating are studied by the bending test and the salt spray test and are compared with those of hot dip zinc coating. 通过弯曲试验和盐雾试验，研究了热浸Zn?0.;1Ni合金镀层的粘附性能和耐腐蚀性能，并与热浸锌镀层对比。
- The corrosion resistance of these coatings is better than that of mechanical Zn plating coating,especially CuNi alloy coating is the best. 这些铜及铜合金镀层的耐蚀性能皆好于机械镀锌层,尤以铜-镍合金镀层的耐蚀性能最高,提高15倍左右;
- Scanning electron microscopy (SEM) and Energy-dispersive X-ray analysis (EDX) were employed to characterize the morphologies and the compositions of Pd- Ni alloy nanowires,repectively. 借助扫描电子显微镜(SEM)和X-射线能谱仪(EDX)表征纳米线的形貌和成分。
- The effects of the process parameters on the composition and microstructure of bulk nanocrystalline Co Ni alloy deposit prepared by jet electrodeposition are studied with SEM, EDS and XRD. 利用扫描电子显微镜 (SEM)、能谱仪 (EDS)及X射线衍射 (XRD)等分析方法研究了工艺参数对电解液喷射电沉积法制备块体纳米晶Co Ni合金沉积层成分及结构的影响。
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- The characteristics of age hardening were studied for Fe W Co and Fe W Co Ni alloys. 对Fe?W?Co和Fe?W?Co?Ni合金的时效硬化特性进行了研究。
- Screw Steel or brass alloy with Zn or Ni plating. 端子螺栓以钢或铜合金为原料，表面再加以镀锌或镀镍等处理。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate. 对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
- Keywords Cu Ni alloy;hard alloy;reamer; 铜镍合金;硬质合金;铰刀;
- The average microhardness of the laser clad silicide alloy coating ranges from HV650 to HV750. 涂层组织显微硬度在HV650-750之间,沿层深分布均匀;
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
