您要查找的是不是：
- Z axis 10 section auto-refining processing function. 轴10段自动修细加工功能。
- X axis has often a different focus from Z axis one (tools rake). 轴和Z轴分别有一个聚焦条显示。
- Z axis typeface and stylistic differences are generally ignored. 轴方向字样上和风格上的差异一般忽略不计。
- Z axis Z 轴,竖座标轴
- X, Y, Z Axis guides at recirculating rollers on hardened and ground guides, inserted with screws. X、Y以及z轴导轨经由淬火处理打磨而成，内置有螺纹。
- Since we can't specify Lx and Ly, the vector L can lie anywhere on the surface of a cone whose axis is the Z axis. 由于不能确定Lx和Ly，矢量L可以处于以Z轴为轴的圆锥体面上任意处。
- The slope drift in Z axis is measured using the outputs of INS after BBA calibration. 而斜坡漂移则在综合校正后，利用惯导系统的输出来建模，测量出来并进行补偿。
- The actual shape (typeface) attribute (the Z axis) is for differences of type design (the actual shape used in imaging) of each variant form. 实用形（字样）特质（Z轴）表示的是某一字的某一变体在具体字样（字型）中形态上的差异。
- MIP of the dataset in the Z axis direction was computed and segmented as a mask. 正确地提取了血管并建立了几何模型。本文提出用随机森林进行多通道图像的组织分类。
- The motor controller and software can also drive an optional Z axis or focus motor which can be fitted to the fine focus knob of most of the newer microscopes. 电机控制器和软件也可以驱动Z轴或聚焦电机，聚焦电机可以安装到最新显微镜的细调旋钮上。
- Rotary tool turret with 12 VDI rotary tool position is prepared for any rotary tools for X axis and Z axis,which are used for milling,boring and tapping. 回转刀塔的刀盘提供了12个VDI旋转刀具的安装位，允许在刀盘的任意刀位上安装X向或Z向的旋转刀具。从而实现铣、钻、攻丝等加工功能。
- The Z axis is provided with zero output to facilitate the setting and changing of electrical charging depth if installed with optical ruler. 若加装光学尺Z轴具有零点输出功能放电深度的设定及变更容易。
- Materials and Methods: The precision and accuracy of target position in Z axis plane and X axis plane were measured by the film dosimeter. 材料和方法： 通过胶片法分别测量靶点位置在Z轴平面和X轴平面上的总精确度。
- Then you have to check also the X and Z axes digital comparators. 然后你必须检查X轴和Z轴的数字比较器。
- According to the plane coordinate in each image, buccolingual direction was presented as X axis, mesial-distal direction as Y axis and occlusogingival direction as Z axis. 根据各层图上建立的平面坐标，设颊舌向为X轴，近远中向为Y轴，牙合龈向为Z轴。
- The Z axis adopts the high precise linear track by Swiss SCHNEEBERGER and the high sensible servo-motor by Japanese SANYO, which is provided with an excellent rigidity. 轴使用瑞士SCHNEEBERGER高精度线性滑轨配合日本SANYO高灵敏度伺服马达精度高，刚性佳。
- The first two boxes are the symmetrical sloped boxes on either side of the bridge, notice that they have been rotated by 8 degrees around the Z axis to get the slope. 开始的两个框的值是桥的两边的对称斜坡的，注意他们是围绕Z轴旋转8度得到的斜坡。
- The next step will be to add a DVE tool to rotate the image down to a simulated ground plane.After this we'll animate it spinning on the Z axis to add a little excitement to the backdrop. 下一步我们将增加DVE节点来旋转图像模拟地平面，然后我们会旋转它的Z轴来给背景增加一点趣味。
- Results Gnathion and gonion showed positive displacement on X and Y axes and negative displacement on Z axis. 颏顶点、下颌角点均表现为X、Y轴向的正位移,Z轴向的负位移。
- The corners are returned in WCS coordinates with the box edges parallel to the WCS X, Y, and Z axes. 它得到的就是与WCS平行的框（两个顶点），你想要不与WCS平行的框，它肯定就做不到了，你只有将你要操作的对象旋转到WCS平行，才可以
