您要查找的是不是:
- Abrasive wear at elevated temperature 热磨料磨损
- Application of Hypereutectic High-Chromium Cast Iron in Abrasive Wear at Elevated Temperature 过共晶高铬铸铁在热磨料磨损工况中的应用
- The PBMI/YM modified resin-matrix contact strip against copper has superior wear resistance at elevated temperature than that of unmodified one under the same conditions. 结果表明:PBMI/YM改性树脂的耐热性优于YM树脂,PBMI/YM改性树脂基滑板的耐磨性明显优于YM树脂基滑板。
- Wear at elevated temperature 高温磨损
- Relating to or designating chemical activity at elevated temperatures. 高温化学的有关或表明高温下的化学活动的
- The workers are coking the coals at elevated temperatures. 工人们在对这些煤进行高温结焦。
- The fracture appearance showed that ductile fracture happened during tests at elevated temperature. 断口形貌显示,叠轧材料的高温断裂属于韧性断裂。
- The friction tests indicated that the Fe-Re alloys electrodeposition plays the roleof self-lubrlcation at elevated temperature,and alloy blo... 摩擦实验结果表明,铁-铼镀层有高温自润滑的作用,有希望代替整体冶炼的铁-铼合金。
- The results showed that dynamic recovery happened during tensile tests at elevated temperature, subgrain size increased with temperature rising. 结果表明,在高温拉伸过程中,叠轧后材料发生了动态回复,形成的亚晶组织随温度升高而长大;
- The bulk second-order nonlinear optical susceptibility of waveguide films is created by corona-onset poling at elevated temperature. 并用升温电晕极化方法使波导薄膜获得宏观二阶非线性效应。
- The chemical pulping, the wood chips are cooked with the appropriate cooking chemical at elevated temperature and pressure. 在化学制浆中,木片在较高的温度和压力下加入适当的蒸煮用化学品进行蒸煮。
- The oxidation resistibility of magnesium alloy at elevated temperature could be increased by a small amount of Ca addition. 少量的钙加入镁合金中,可以显著提高镁合金在高温下的抗氧化性;
- The creep modes for plastic and brittle meterials at elevated temperature have been analysed according to the curves of stress-strain. 根据其应力-应变曲线,分析归纳了塑性及脆性材料高温下的蠕变模型及在生产中的应用。
- At elevated temperatures the static load carrying capacity is reduced. 在高温下静负荷承受能力会下降。
- Ma Shengli and Ma Jin, Frictional behavior of faults with quartz and calcite gouge at elevated temperature and pressure, Acta Seismologica Sinica, 2, 1. 马胜利,马瑾,1988,高温高压下石英和方解石断层带的摩擦滑动性状,地震学报,10,1。
- Tessa laid out her best dress to wear at the party. 特莎准备出她最好的衣服去赴会。
- And the effect of polypropylene fiber on reducing the loss of compressive strength of HPCM and reliving explosive spalling at elevated temperature was analyzed. 最后分析了聚丙烯纤维对减小高温后HPCM抗压强度损失和缓解高温爆裂现象等方面的作用。
- The triaxial mechanics properties of a resin sand at elevated temperature are revealed through the recently developed trixaial apparatus for moulding sands. 利用新研制的型砂高温三轴测试手段,首次测定了常用树脂型砂在围压作用下的高温三轴力学性能。
- The results show that the main causes are severe welding defect,material quality and the cracks formed at elevated temperature, high pressure and corrosion conditions. 研究表明,早期失效的主要原因是严重的焊接缺陷及材质问题,以及受高温、应力、腐蚀等因素影响而形成的裂纹。
- Yen B.K. and Tadashi Ishihara, “An investigation of friction and wear mechanisms of carbon-carbon composites in nitrogen and air at elevated temperature”, Carbon, Vol.34, pp.489-498, 1996. 高伟王民,石墨化处理对碳/碳复合材料机械及磨润性质之影响,国立成功大学材料科学及工程研究所硕士论文,2007年。