您要查找的是不是：
- Range Min and Max.-OD with wall thickness. 范围分钟和最大Od以壁厚度。
- Influence of wall thickness deformation upon the minimum bending radius of bending tube 壁厚变形对弯管最小相对弯曲半径的影响
- The former is similar to bulge, but the deforming mode of the latter is rolling in which the stress is tensile in generatrix direction and the wall thickness are mainly reduced in this zone. 前者的受力情况类似于胀形,后者为母线方向拉应力作用下的辗压变形,该区起主要减薄壁厚的作用。
- wall thickness deformation 壁厚变形
- The backing of bearings with greater wall thickness is not copper-plated. 轴承壁较厚的轴承,其背衬不镀铜。
- APACO processes Hardboard, MDF or Chipboard up to a wall thickness of 18mm. 橱柜/壁柜/橱柜门板/人造石厨房台面加工制作.
- The forecasted wall thickness was conformed to the experimental result. 预测的壁厚和实验结果吻合得很好。
- End connection including wall thickness of connecting pipe if weld end and any special flange facings or finishes. 连接方式,如果是焊接端口和任何法兰面或表面,则包括连接管道的壁厚。
- What is the foundry's checking frequency for control of core shift and wall thickness? 工厂检验芯偏移以及壁厚的频率?
- The tube deformation characteristics on ASSEL mill are deformation concentrating at shoulder and wall thickness in rolling zone increasing. ASSEL轧管机具有台肩集中变形、碾轧段壁厚增厚等特点。
- The wall thickness of a 1-litre bottle preform is 3mm. The cooling time is 10.8s. 1公升的矿泉水瓶瓶坯壁厚3mm，冷却时间便占10.;8秒。
- The wall thickness of a 5-gallon bottle preform is 8mm. The cooling time is 76.8s. 5加仑瓶瓶坯壁厚8mm，冷却时间是76.;8秒。
- When chilled water is used to cool the mould, cycle time is related to wall thickness as follows. 在冰水冷却的条件下，冷却时间与壁厚有以下的关系。
- The aorta wall thickness (AWT) was measured wiht B-mode echocardiography in 128 patients with primary hypertension. B型超声心动图下测量了128例高血压病患者主动脉壁厚度（AWT），同时检测了血脂指标。
- Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness. 高速离心铸造,组织致密,无砂眼、夹渣,表面光滑、壁厚均匀。
- The carotid intima-media wall thickness (IMT), crouse score and plaque incidence were measured. 测量颈总动脉后壁内中膜厚度(IMT),斑块厚度,计算斑块积分及粥样斑块发生率。
- The serum apolipoprotein (apo) level, aorta wall thickness (AWT)and ocular fundus were simutaneously examinated. 同时进行血清载脂蛋白（apo）、主动脉壁厚度（AWT）及眼底检查。
- The wall thickness of the hollow aeroengine turbine blade is a critical parameter for ensuring its strength. 航空发动机空心涡轮叶片的壁厚是保证叶片强度的一个关键参数。
- Movement is powered by hidden electric motors on ‘bogeys' integrated into the wall thickness. 运动是由电动机的隐藏'忌'融入壁厚。
- It was virtually difficult to distinguish between benignancy and malignancy by the wall thickness alone. 有关病灶之良性或恶性与否，单藉胃壁增厚程度的多寡很难加以鑑别。
