您要查找的是不是:
- Test Method for Vicat Softening Temperature of Plastics (08. 塑料的维卡软化温度的试验方法(08。
- The results showed that the Vicat softening temperature and the tensile yield strength were improved with the increase of CPVC content. 结果表明,共混材料的维卡软化温度和拉伸屈服强度随CPVC用量的增加而增加;
- The results showed that the Vicat softening temperature and the tensile yield strength were improved with increasement of CPVC content. 结果表明,共混材料的维卡软化温度和拉伸屈服强度随CPVC用量的增加而增加;
- The results showed the Vicat softening temperature,tensile yield strength and melt viscosity of the blend increased with the increase of CPVC content. 结果表明:共混物的维卡软化温度、拉伸屈服强度和熔体粘度随CPVC用量的增加而明显增加;
- When PP/LLDPE =50:50-20:80,LLDPE modifies toughing effects of PP, And PP modifies processing, mechanical properties, vicat softening temperature of LLDPE. 当PP/LLDPE=50:50-20:80时,LLDPE能明显改善PP的脆性大,同时,PP改善LLDPE的加工性、力学性能及耐热性能。
- The HDT/VICAT Tester evaluates the thermal resistance of molded plastics materials and examines both the heat deflection temperature (HDT) and VICAT softening temperature (VST) due to heat-up. VICAT热变形维卡测试仪测试高分子材料热塑成型温度及软化点,可以进行电脑控制,操作简单。
- Keywords Polymer;Heat distortion temperature;Vicat softening temperature; 高聚物;热变形温度;维卡软化温度;
- The Development of a Thermal Deformation and Vicat Softening Temperature Microcomputer Measurement and Control System 热变形与维卡软化点温度微机测控系统的研制
- Keywords Acrylonitrile;Styrene-acrylonitrile Copolymer;Mechanical Properties;Vicat Softening Temperature; 丙烯腈;苯乙烯-丙烯腈共聚物;力学性能;维卡软化温度;
- Keywords HDPE;Rice Hull Flour;Mechanical Properties;Hardness;Vicat Softening Temperature;Flowability; 高密度聚乙烯;稻壳粉;力学性能;硬度;维卡软化温度;流动性;
- Vicat softening temperature 维卡软化温度
- It is showed that heat deformation temperature is same as working temperature of cable; Vicat softening point is close to the switch temperature. Based on the observations, HDPE was choose to be the matrix of self-regulating heating cable. 认为材料的四川大学硕士学位论文:高密度聚乙烯/炭黑复合导电材料及制品的研究热变形温度与自控温伴热带的工作发热温度接近,维卡软化温度与制品开关温度相当,并由此确立了以HDPE为基体材料来开发80℃发热等级自控温伴热带。
- A curve-fitting method in HDT and VICAT softening point measurement and a method for on-line parameter modifying were proposed. 通过试验和分析提出了在热变形温度与维卡软化点测定仪中应用温度曲线拟合的测定方法,介绍了拟合方程系数的在线修正方法。
- The mechanism was revealed by measuring wetting heat,changing of size distribution and softening temperature,and so on. 测定润磨预处理前后巴西镜铁矿的润湿热、粒度组成及变形温度等指标,揭示其作用机理。
- The low-temperature glass is characterized by softening temperature,liner expansible coefficient and chemicalstability. 低温玻璃的表征方法主要有:软化温度、线膨胀系数、化学稳定性等。
- With increasing CaCO3 contents, vicar softening temperature and hardness of the blend increases, while the water adsorption decreases. 同时活性CaCO_3的加入使ABS/PVC/PE-C共混体系的吸水率有所降低,维卡软化温度和硬度则随着CaCO_3含量的增加而有所升高。
- The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated. 摘要分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。
- The lead frame materials must have high softening temperature because they need to bear short-time high temperature conditions in the process of capsulation. 由于在引线框架材料的后续封装过程中材料需承受短时高温使用条件,所以对其软化温度提出了很高的要求。
- The result showed that the adding of graphite didn't affected the micro-phase separation feature of the PUE and increased softening temperature of the composite. 结果表明,石墨颗粒在PUE基体中分布均匀,不影响其微相分离特征,并可提高材料的软化温度;
- Glass is a non-crystalline inorganic material, with the temperature rise of flacherie, when heating the softening temperature reached glass, glass will be distorted. 玻璃长短晶质不不有机质料,随着温量的升矮而强硬,当加冷到达玻璃的强硬温量时,玻璃不离会变形。