您要查找的是不是:
- Jim was no end upset because he couldn't go swimming. 吉姆因不能去游泳而十分烦恼。
- Cut tube end square. Ream, burr and size. 垂直切割管道。刮除毛刺,测量尺寸。
- The multi-station tube end machine is the mechanic-electrical machine that processes the tube’s end with cutting, angle of chamfer, whorl ditch. 多工位管端成形机是对管件的管端进行切削、倒角、旋沟加工的机电一体化设备。
- The multi-station tube end machine is the mechanic-electrical machine that processes the tube's end with cutting, angle of chamfer, whorl ditch. 多工位管端成形机是对管件的管端进行切削、倒角、旋沟加工的机电一体化设备。
- The basic principle and the method of oil drill pipe end upsetting process were presented. 介绍了石油钻杆端部镦锻加厚工艺基本原理及加厚方式。
- The control system of the electric upsetting machine was based on a PC and universal control cards. The kernel of the system was blocking software. 电镦机的控制系统是基于单台PC机和通用型控制板卡的智能控制系统,其灵魂是模块化的软件系统。
- Application of PLC in Tube End Expanding Machine 可编程控制器在扩口成型机中的应用
- Pipe &hose assembly is convenient and double-quick when assembly.There are three seal grooves at tube end for reducing leakage rate of refrigerant . 管路总成装配方便、快捷,接头处三道密封槽,减少了制冷剂的泄漏。
- Cut tube end square to exact length needed, so that tube will enter valve socket all the way to the shoulder. Ream, burr and file. 根据所需长度垂直切割管道,使得管道能够完全进入到阀门插口的肩部。刮除毛刺,进行锉磨。
- Study of PLC in Electrical Upsetting Machine 气门电镦机的PLC控制
- A study on oil drill pipe end upsetting process 石油钻杆管端加厚工艺研究
- A water pipe that consists of a bottle or a vertical tube partially filled with liquid and a smaller tube ending in a bowl, used often in smoking narcotic substances. 水烟枪一种用部分盛液体的瓶或垂直管和一根接在木球上的小管做成的盛水管,经常用来吸麻醉物品
- UPSETTING MACHINE FOR REINFORCING STEEL BAR 钢筋镦粗机
- horizontal forging and upsetting machine 平锻机
- The glass tube ends in a bulb. 玻璃管的末端呈球形。
- The experimental results on the effect of inclined angle of tube end on flooding velocity of immiscible mixtures condensed in a vertical tube are reported. 实验研究了管端斜口对竖直管内不互溶蒸汽冷凝液泛气速的影响,并给出了经验关系式。
- Hydraumatic and spontaneous bulging of bimetal tube in the case of tube end immovable and tube end unrestricted was studied by utilizing numerical simulation technology. 利用数值模拟技术研究了双层管在管端固定和管端自由两种情况下的液压自然胀形,得到了2种情况下的临界液压胀形力和胀形高度、管件长度、管层厚度等的变形规律。
- The tube nut is placed over the end of the copper tube to be joined;the tube end then is flared out at an approximate 45 degree angle by a flaring tool. 管道螺母放置在连接铜管的末端端口上,然后采用扩口工具将管道端口扩口成45度角。
- Entirely cleaning of outer surface of tube end and adopting of hydraulic expanding are effective to assure the quality of the tube-tubesheet joint of heat exchanger. 对换热管管端外表面进行严格清理并采取液压胀管工艺,有效保证了换热器管子-管板接头的制造质量。
- Simulation of Upsetting Machine Action Under Real Time Control 实时控制下的电镦机镦粗动作模拟