您要查找的是不是:
- TiNi alloy sheet 薄片状TiNi合金
- The theory calculation of hydroxyl preferential absorption for Ti on TiNi alloy surface is completed by DVM- Xa. 通过基于密度泛函理论的离散变分Xa方法的理论计算,确定了在TiNi合金表面,羟基会优先与Ti吸附。
- Continuous cast of TiNi alloy has been realized with homemade equipment consisting of an induction heating with CaO crucible and BN lining of crystallizer. 在自行研制的钛合金连铸装置上进行钛镍合金的连续铸造实验,在感应加热下使用氧化钙坩埚和氮化硼结晶器内衬,通过调整各项工艺参数,实现连续铸造。
- AZ31 magnesium alloy sheet were prepared by equal channel angular rolling(ECAR). 采用等径角轧制工艺制备了AZ31镁合金板材。
- The forming limit of 3A21 Aluminum alloy sheet was tested and the forming limit diagram (FLD) was determined. 通过标准成形极限实验获得3A21铝合金板材的成形极限图(FLD);
- AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. 通过温热交叉轧制工艺制备了板形以及成形性能良好的AZ31镁合金薄板;
- The results show that there is strong basal texture in the rolled AZ31 Magnesium alloy sheet. 结果表明,经过轧制之后的AZ31镁合金板材形成强烈的基面织构;
- Complete ODF analysis is thus made for the texture of a cold-rolled TA7 titanium alloy sheet. 按此法对实测的冷轧TA7合金板材完整ODF施行织构分析。
- Based on the preliminary study on LSF(Laser Shock Forming) both at home and abroad, the LSF of titanium alloy sheet is studied. 本文在分析了国内外激光冲击成形研究现状的基础上,对钛合金板激光冲击成形进行了实验研究。
- X|ray diffraction analysis of alloys after dual implantation reveals that TiC, and some TiO, Mo 2C,Mo 9Ti 4 and Mo are formed on TiNi alloy,and CoC x , Co 3Ti,TiC and TiO on cobalt alloys. 对双离子注入合金进行 X射线衍射分析发现 ;在 Ti Ni合金表面主要形成了 Ti C相及少量 Ti O、Mo2 C、Mo9Ti4 及 Mo;在 Co合金表面主要为 Co Cx和 Co3Ti及少量 Ti C、Ti O相 .
- Good agreement is found between the theoretical calculations and the results from the experiment that use SPCC deep drawing sheet and S754 Aluminum alloy sheet as workpieces. 以SPCC深拉深钢板和5754铝合金板的试验表明,理论计算与实测结果相近。
- The effects of the main processes on texture and earing of 3104 aluminum alloy sheet are investigated with the help of electron microscopy,X ray diffractometry and deep drawing. 采用金相显微镜,X-射线衍射技术和深冲试验等手段,研究了主要生产工艺因素对3104铝合金板材织构和制耳行为的影响。
- Company is mainly engaged in EPS, EPE, EPP foam mold manufacturing, mold the main raw material for aluminum alloy sheet, is a major manufacturer of foam mold. 公司主要从事EPS、EPE、EPP泡沫塑料模具的制造,模具的主要原材料为铝合金板材,是国内主要的泡塑模具生产厂家之一。
- The objective of this study is to investigate the method of improved drawability of AZ31 magnesium alloy sheet produced by differential speed rolling process at room temperature. 文章主要对异步轧制AZ31镁合金板材室温冲压性能进行了研究,以探讨提高镁合金板材冲压性能的途径。
- The effects of the main processes on texture and earing of 3104 aluminum alloy sheet are investigated with the help of electron microscopy,X-ray diffractometry and deep drawing. 采用金相显微镜,X-射线衍射技术和深冲试验等手段,研究了主要生产工艺因素对3104铝合金板材织构和制耳行为的影响。
- Surface hardened steel, copper, aluminum alloy sheet, hard alloy steel, zinc layers, chrome layers, tin layers, surface heat treating and chemical treating materials, etc. 表面淬火钢,铜、铝合金薄板,带钢,硬质合金钢,镀锌,镀铬,镀锡,材料表面热处理和化学表面处理的各种金属材质
- Study of SME by Using Factorial Design Analysis in TiNi Alloy 因子设计法分析TiNi合金形状记忆效应的研究
- Pore Features of Porous TiNi Alloy Sintered in Argon Atmosphere 氩气保护烧结多孔TiNi合金孔隙特征的研究
- The effect of Ni content and aging on phase transformation heat ( Q ) of martensite (M) and rhomboheddrel (R) transformation in TiNi alloys have symtematically been studied by using DSC, optical microscopy, SEM and EDX. 用示差扫描热分析仪(DSC)、光学显微镜、扫描电镜和EDX能谱仪系统研究了Ni含量和时效对TiNi合金R、马氏体(M)相变热(Q)的影响。
- Surface hardened steel, surface heat treatingchemical treating materials, copper, aluminum alloy sheet, zinc layers, chrome layers, tin layers, bearing steel, coldhard casting parts, etc. 表面淬火钢,材料表面热处理和化学处理,铜、铝合金等薄板,镀锌、镀铬、镀锡材料,轴承钢,冷硬铸件等。