您要查找的是不是：
- TSO Sublance measures the temperature of molten steel and oxygen activity lecels using a sensor positioned at its upper end. TSO副枪在探头顶部末端使用了一个高精度的定氧传感器，它可以测定钢水中的氧含量与温度。
- It was anylyzed that the influence of the viscosity of slag,The content of C and Mn,the temperature of molten steel on the oxidbillity of slag by test. 通过实验,分析了炉渣粘度、钢水碳锰含量、温度对炉渣氧化性的影响。
- The casting temperature of molten steel is an important parameter in converter production and plays a determinative effect in the CC process. 钢水的浇铸温度是炼钢生产过程中的重要参数,并在连铸中起决定性的作用。
- Sparks of molten steel dash in all directions. 钢花乱迸。
- Temperature of Molten Steel 钢水温度
- The present research situation of molten steel temperature drop of ladle in steelmaking plants is described. 摘要介绍了炼钢厂钢包内钢水温降研究的现状。
- In present study, a proposal to improve the inclusion floatation and temperature homogenization of molten steel is presented through an optimizing study by water modeling. 通过优化设计，提出了促进夹杂物上浮和均匀中间包内钢水温度的设计方案。
- The influences of rare earth alloy addition amount, temperature and chemical composition of molten steel on desulphurization effect were investigated. 对稀土合金加入量、钢液温度和化学成分对脱硫效果的影响进行了试验研究。
- This paper introduces the development prospect of applying tungsten-rhenium thermal couple to continuous measurement of molten steel temperature. 本文介绍钨铼热电偶用于钢水连续测温的开发前景；
- The accurate predictions of the temperature and carbon content of molten steel at BOF endpoint are of great importance to raising the hitting ratio of endpoint. 准确预报转炉炼钢的终点钢水温度及碳含量，对于提高终点命中率具有重要意义。
- The effect of molten steel purity, casting temperature, performance of protecting slag, oscillation and liquid level control of mold in continuous casting on surface defect wa. 重点阐述了钢水洁净度、浇铸温度、保护渣性能、结晶器振动以及液面控制等连铸工艺对表面质量的影响。
- Breakout of molten steel in billet continuous casting occurs frtquently. 在小方坯连铸生产中，漏钢事故经常发生。
- The said purifier mainly is used for final deoxygenation of molten steel. 该净化剂主要在钢液终脱氧时使用。
- This probe can not measure the internal temperature of molten metal because the junction is formed on the surface of molten metal. 这种探针不可测量熔化金属内部温度因为连接的点是在熔化金属表面的。
- The reason for inner crack of Q235 square billet is analyzed. It is considered that chemical component, molten steel temperature of tundish and drawing speed are the main elements. 分析了宣钢炼钢厂Q235方坯产生内裂的原因,认为化学成分、中包钢水温度和拉速是导致Q235方坯产生内裂的主要因素。
- The temperature of volcanic gases is very high. 火山气体的温度很高。
- The influence of chemical composition,inoculation process,temperature of molten iron and pouring system on the formation of shrinkage cavity and porosity was described. 叙述化学成分、孕育工艺、铁液温度及浇注系统等因素对薄壁球铁铸件缩孔和缩松形成的影响。
- An investigation of dephosphorization of molten steel conta-ing 18% Cr with CaSi, Ba, Ce was made in the laboratory. 在实验室中用CaSi,Ba,Ce做18%25Cr钢液的脱磷研究。
- The effect of the type and quantity of iron ore powders, and the composition and temperature of molten iron on the oxidization of C, Si, Mn, in hot metal are studied. 摘要研究了不同铁矿粉氧化剂以及矿粉加入量、铁水初始成分、铁水温度等因素对铁水碳、硅、锰氧化的影响。
- Formation mechanism of sticking breakout and basic principle of molten steel leakage prediction system are explained. 阐述了粘结漏钢的形成机理和漏钢预报系统的基本原理。
