您要查找的是不是:
- Rotate turn signal bulb socket counterclockwise, pull on bulb to remove. 逆时钟旋转转向信号灯灯泡插座,拔下灯泡。
- TURN SIGNAL BULB SOCKET 转向信号灯灯泡插座
- Turn bulb socket 1/4 turn clockwise. 顺时钟旋转灯泡插座1/4圈。
- Position the bulb socket in the lamp and rotate clockwise. 将灯泡灯座置于灯中,并顺时针转动。
- They were pretty basic, and the bulb socket was grounded to the metal base of the signal assembly, which was bolted through the plastic faring into the steel faring bracket. 他们是非常基本,而且灯泡插座的接地的金属基底的信号大会,这是通过塑料螺栓的钢航天航天支架。
- Rotate sidemarker bulb socket counterclockwise grasp and pull from lamp. 逆时钟旋转侧面车种识别信号灯灯泡插座,抓紧插座并从灯中将其拔出。
- Now, the only thing not working was the turn signal blinker. 现在,唯一的事情是没有工作的转向信号信号灯。
- Install turn signal lamp bulb. 安装转向信号灯灯泡。
- You must turn on your turn signal at least 100 feet before the turn. 在转弯之前至少100码就应该打转向灯。
- Did you use the turn signals properly? 你正确使用转向灯了吗?
- Remove bulb socket from lamp. 从灯上拆除灯泡插座。
- A light - bulb socket. 灯泡插座。
- For how many feet before you start to turn should you begin your turn signal when you are driving on a highway? 在高速上转弯时应提前多长距离打指示灯?
- I didn't find the exact H4 bulb socket that I was looking for, but I found a couple H4 sockets that would do. 我没有找到确切的H4灯口灯泡插座,我正在寻找,但我发现一对夫妇H4灯口插槽,将尽。
- It is located in the steering column as part of a combination dimmer, horn, and turn signal switch. 它位于转向柱上,作为组合变光开关、喇叭和转向信号开关的一部分。
- When it is safe, give a right turn signal and take up position just left of the middle of the road or in the space marked for right-turning Traffic. 情况安全的话,发出右转信号,然后驶至路中央偏左处,或驶入画上右转道路标记的行车。
- flat bulb socket with Edison cap 螺口平灯头
- So, if the problem was initially the short in the right turn signal, why hadn't it blown the fuse before the flasher failed? 因此,如果这个问题最初是在短期内右转信号,为什么没有爆炸的导火索是前闪光失败?
- MEASURE THE VOLTAGE AT THE BULB SOCKET 测量灯泡插座电压
- When light falls on a receptor it sends a proportional response synaptically to bipolar cells which in turn signal the retinal ganglion cells. 感光细胞感受到光后向双极细胞发送一个相应于光强度的信号。