您要查找的是不是：
- The TIG welder used for much of the construction. 在氩弧焊焊接机建造多次使用。
- The fuzzy pattern recognition technique is then applied to classifying TIG weld quality. 模糊模式识别工艺被应用于TIG焊接法质量的等级分类。
- Finally, an experimental verification of the classification results for TIG weld quality with different process parameters is shown. 最后将展示的是TIG焊接法质量的等级分类的不同工艺参数的加工实验检查结果。
- A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed. 对运动电弧作用下脉冲TIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
- Simulated by WSI at 5G position, the INCONEL 52M TIG weld passed Liquid Penetrant inspection (LP) and Ultrasonic test (UT) thoroughly, no any defects observed. 经WSI模拟5G位置TIG焊测试,INCONEL52M的TIG 焊缝完全通过液体渗透探伤(LP)和超声波探伤(UT),未发现任何缺陷。
- Fig.6 The effect of heat input on the UTS of the TIG welded joints. 图6线能量与钨极氩弧焊焊接接头极限抗拉强度的关系。
- This paper analyses the cause of uncleanness of air pipe line on locomotive,and puts forward taking TIG weld ing tech nology in order to ensure that the quality of pipe line on lo como tive achieves design standard. 针对目前机车空气管道内清洁度差的问题,分析其原因,提出采用TIG焊接工艺,以保证机车管道质量达到设计要求。
- This paper introduces the TIG welding technology for EGR cooler shell. 介绍了EGR冷却器外壳钨极氩弧焊焊接工艺。
- The trawsform on the weld penetration depth are studied after welding the Austenitic steel of activated flux with TIG welding. 在采用TIG焊接方法时,在奥氏体不锈钢的表面涂敷一层活性化焊剂进行焊接,会影响焊缝熔深的变化。
- To weld and repair the aircraft landing gear by manual TIG welding instead of shielded metal arc welding(SMAW welding)which is used in air unit now is tentatively discussed. 对用手工TIG焊方法代替目前航空部队采用的手工电弧焊(SMAW焊)修理飞机起落架进行了初步探讨,并经试验得出了TIG焊的最佳焊接工艺。
- The multipurpose welders in the series can be operated for MMA, DC TIG welding, Plasma cutting processes. 焊机具有手工弧焊,直流氩弧焊,等离子切割多种功能。
- TIG welding power source made from SCR and bifilar winding energy saving inductor is introduced in this paper. 研制了一种用双绕组储能电抗器构成的晶闸管TIG焊电源。
- Welding tests showed the panel TIG welding machine can be applied successfully in hyperbaric conditions. 试验证明,该焊机可以成功地应用于高压环境下的焊接。
- Bead welding process to Q235A was made by TIG welding and H1Cr24Ni13 austenitic stainless steel welding wire. 采用TIG焊方法和H1Cr24Ni13奥氏体不锈钢焊丝,对Q235A进行堆焊加工。
- Properties of pearlitic steel and austenitic stainless steel compound pipes TIG welded joint are studied in this paper. 研究了珠光体钢和奥氏体不锈钢复合管钨极氩弧焊(TIG)接头的性能。
- Mathematical model and analysis of the protective effect of TIG welding is adopte for torch design. 焊接时保护气流流场的数值分析对于焊枪的设计提供了新的思路。
- The general concept and consist of pulse TIG welding machine improved are introduced in this paper. 介绍一种用普通直流氩弧焊机改装脉冲焊的装置,论述了各组成部分的基本原理。
- The threaded stainless steel vane are solidly TIG welded to the vanes, making this the strongest spider on the market. 有现状图案装饰的不锈钢管叶轮被TIG焊接到集线器上，使之成为市场上最强的三角架。
- China is a country with rich tungsten resource, tungsten electrodes have been widely applied in the TIG welding. 我国是钨资源大国,钨电极在亚弧焊接中已得到广泛应用。
- A type of switched HF pulse TIG welding power source is introduced in this paper. 本文介绍一种开关式高频脉冲TIG焊电源。
