您要查找的是不是:
- Study showed that angle deformation of T joint is changed along the welded seam length. 研究表明,T形接头的角变形沿焊缝长度方向是变化的。
- The rupture reasons of tube joint weld of the stainless steel pressure meter are analyzed.It is characteristic of stress corrosion cracking and inter granular fracture. 分析了不锈钢压力表管接头焊缝开裂的原因,认为此种开裂具有应力腐蚀开裂、沿晶断裂特征。
- Keywords skirted support;overlap joint weld;stress analysis; 裙式支座;搭接焊缝;应力分析;
- The analysis showed that overside of parameter in furnace tube joint welding,and unsuitable choices of the welding material were the main reason of the joint failure. 分析结果表明,炉管接头焊接工艺参数过大,焊接材料选择不当,是引起炉管焊接接头失效的主要原因。
- The results show that the perfect joint welded is obtained by choosing suitable welding condition to meet requirement of Aspect;smoothness;nugget dimension and mechanical properties. 结果表明:选用中等偏硬一些的焊接规范,可以获得较理想的点焊接头,接头的外观、平滑度及熔核尺寸和力学性能满足了相关标准的要求;
- XLPE Cable T Joints in Urban 110kV Network 城网110kV XLPE电缆T接头的实施
- The Stress Analysis of T Shape Multi as welded Joints Weld Bead T型接头多次补焊焊缝的应力分析
- The Study of Lower Temperature Property on TIG-dress High-strength-steel Joint Weld Bead 高强钢TIG熔修焊缝裂纹的低温力学性能研究
- on-site anti-corrosion joint welding of pipeline 管道防腐现场补口
- Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined. 对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比,确定了合适的焊接工艺参数。
- The joints welded by newly developed non-crystal metal welding process have smooth surfaces, with excellent intercrystalline corrosion resistance and no internal and external welding beadings. 非晶体金属焊接工艺新颖,焊接接头表面光滑、内外无焊瘤、抗晶间腐蚀性能良好。
- That will be a total of eighty N T. 那总共八十台币。
- Keesh watched the bear tha t whole day. 季奚那一整天都在旁边看着它。
- Don’t scrawl all over the wall. 不要在墙上乱涂乱画。
- Joint welding of clad steels; design and performance 复合钢的连接焊;设计和结构
- Remember to cross your t's when you're writing. 写字时别忘了在t 字母上画横线
- Don’t confound public affairs with private ones. 不要把公事与私事混为一谈。
- Tube Joint Welding Process of Maleic Anhydride Reactor 顺酐反应器管接头焊接工艺
- If you don’t like it, I’ll trade with you. 如果你不喜欢,我跟你换。
- He screeched that he didn’t do it. 他尖叫着说他没做那事。