您要查找的是不是:
- Static load strength analysis 静载强度分析
- THE DEFINITION OF INDICATON VALUE OF DIAMOND STATIC LOAD STRENGTH AND ITS NUMERIC VALUE 金刚石静载强度指示值的定义与数值
- A rational definition of dynamic strength is given for static load superposed on dynamic load. 针对动静叠加的加载方式,给出一种合理的动强度的表示方法。
- Relevant conclusions of structure deformation are gotten through the analysis of deformation curve of static load test of bridge soan. 通过对该桥梁跨度静荷载检验变形曲线进行分析,得出了其结构变形的有关结论。
- FEM analysis using ANSYS software was carried out to study the stress and deformation of the structure of the paper pulp pad under the static load. 在机电产品的纸浆模塑衬垫设计中,利用ANSYS软件进行有限元分析,研究静载作用下的衬垫受力及变形情况。
- The smaller of the two values represents the maximum static load. 这两个值的较小者代表最大静负荷。
- Strength analysis of the rotors of the rotary disc dryers. 旋转圆盘干燥机转子的强度分析
- Concrete Anchor Saferty Fator Static LOAD 4-5,Vibrative Load 8-10. 本页膨胀螺栓的安全率采用静载荷为4-5倍,动载荷为8-10。
- In order that irregular rock pieces could be used at the site to test the point load strength of rockthe laboratory and the in-situ contrastive testing and analysis are conducted. 为了在现场采用不规则试件测试岩石点荷载强度,在实验室和现场进行了相关的对比测试与分析研究。
- The results show that the dynamic stability analysis can be replaced by quasi-static method with the static load multiplying an amplification factor in calculation. 结果表明:在实际计算中,可以将静载乘以某一“放大系数”作为计算荷载进行拟静力分析。
- A calculative model for one type of planetary gear increaser used in wind power generator is set up and the analysis of the static load sharing mechanism is given. 建立风力发电机增速行星齿轮传动系统的计算模型,从静力学角度出发分析系统的均载特性。
- Abstract: Strength analysis t is important to the safety of aerostat. 摘要 : 强度较核对保证浮空器的稳定工作及自身安全具有重要意义。
- At elevated temperatures the static load carrying capacity is reduced. 在高温下静负荷承受能力会下降。
- The analysis of allowable pipe load calculation method and practical example shows that the calculation method suggested is feasible and effective in solving the problems of pipe load strength design. 通过对许用接管载荷计算方法及算例的分析表明,提出的方法是可行的,可有效解决封头接管载荷强度设计问题。
- The shearing property test of CFRP structure under a static load is conducted. 摘要对CFRP加固的混凝土构件进行了界面静荷载下的抗剪性能试验。
- By analyzed interactions of combined limit pipe load components, simplified check formula for pipe load strength are put forward and the calculation method of relevant allowable pipe load values based on shell finite element analysis is presented as well. 通过对组合极限接管载荷分量相互关系的分析,提出了接管载荷强度验算简化公式和以壳结构有限元应力分析为基础的许用接管载荷计算方法。
- Three-dimension drilling stem strength analysis based on considering the torsion load and studies deformation, bend-moment, stress, the distribution characteristics of RWD BHA was made . 在考虑扭转载荷的基础上进行的三维钻柱组合强度分析,对随钻扩眼下部钻具组合的变形、钻具组合的弯矩和应力大小及其分布规律进行了研究。
- Any good SWOT analysis process starts with your strengths analysis. 任何好的SWOT分析过程是由你的实力分析。
- The brittle failure of the foundation bolt for ladle turntable under the static load and low stress happens due to unsuitable between intensity and toughness in this high strength steel. 介绍了钢包回转台地脚螺栓在低应力状态下发生脆性断裂的实例。证实了断裂是由选材不当、错误的热处理和安装方式等使强度与韧性不匹配造成的。
- According to output data, strength analysis is carried out and three-dimension deformity graphs the drawn. 以奥史考士消防车为实例,根据有限元分析数据进行强度分析。