您要查找的是不是：
- Space stress distribution 空间应力分布
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言，三维的应力分布曲线起伏较大。
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外，上述影响均可以忽略不计。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
- The phonon field and phason field stress intensity factors and stress distribution at the crack tips are also given. 进一步可以求得裂纹尖端的声子场和相位子场的应力强度因子,由这些应力强度因子求解了裂尖处的声子场和相位子场的应力分布。
- On the basis of the reference [1] in this paper the writers utilize the structural displacement method to calculate the softness coefficients of various kinds of derricks ( masts ) under space stress. 本文根据[1]运用的结构位移方法,对任意布置的塔桅式井架,按空间受力状态,计算井架的柔度系数。
- Finite element analysis has been used to calculate the stress distribution in crystals grown by the Bridgman method. 本文用有元分析法计算了 Bridgman 法生长的晶体中的应力分布。
- Objective: To analyse the difference of the stress distribution during mandible to be forced at the midline. 目的:分析不同年龄的下颌骨正中受力时,下颌骨三维有限元分布的差异。
- Conclusion:The established model may be used for the stress distribution of MCD. 结论:该模型可用于上颌全口义齿应力分布研究。
- With similar index, model test’s results predicts antetype structure’s stress distribution. 把模型试验的结果按照相似指标推算出原型结构的应力分布。
- The stress distribution and amount of deformation has been counted under different pavage conditions. 计算不同情况下该种管道的应力分布及变形量。
- Objective To observe the stress distribution of maxillary first molar and its periodontium in lingual orthodontics. 目的采用有限元的方法研究舌侧矫治过程中上颌第一磨牙牙根、牙周膜、牙槽骨应力分布的特点。
- Results: Quartz fiber post would not change the inclination of dentinal stress distribution on the whole. 结果：石英纤维桩对牙根部应力分布的总体趋势影响不大；
- The photoelasticity graph is disposed by numerical method.The stress distribution of die cavity is obtained. 通过对光弹图象的处理,获得了直齿精锻圆柱齿轮凹模的内壁应力分布。
- Sphericity part was simulated, the stress distribution and strain distribution were gained. 进行了球形件的数值模拟，得到了球形件的应力分布与应变分布。
- Conclusion Different musclar loading and biting condition can change the stress distribution of the mandible. 单侧后牙咬合时，咬合侧下颌角区域的应力趋势发生变化。
- Then it compared the stress distribution and strain distribution of blades which is orthotropic material. 并比较了各向异性材料叶片的模态应力和模态应变的分布状态。
- The non-uniform stress distribution makes it difficult to fabricate the same apex height of parallel arch-like beams. 然由于制程上的误差和不均匀的残留应力，使得平行拱形结构之顶点翘曲的程度不一；
